[OpenFOAM.org] compile OpenFOAM v5 source on Ubuntu 1706?

phsieh2005 · August 20, 2017, 10:55

Dear OpenFOAMers,

I am wondering if anyone posted steps on how to compile OpenFOAM v5 source codes on UBuntu 1706?

I tried to following the steps for OpenFOAM v4.1 on Ubuntu 1606, but, the steps did not work for v5 on Ubuntu 1706.

Thanks!

Pei

wyldckat · August 25, 2017, 13:57

Quick answer: The official installation instructions are provided here: https://openfoam.org/download/5-0-source/
They don't provide step-by-step instructions as detailed as the ones at openfoamwiki.net, but if people don't complain about the official ones, then the current format will stay as-is.

As for the ones that are provided at openfoamwiki.net, I haven't had the time+patience to write and test the installation of OpenFOAM 5.0. However, I have revised and updated the ones for OpenFOAM-dev here: https://openfoamwiki.net/index.php/I...OAM-dev/Ubuntu

Although I haven't tried using Ubuntu 17.04 yet... and there are a few bugs in how makeParaView works on the "ThirdParty-5.0" package, which should use instead the one from "ThirdParty-5.x". I will try to look into this during this weekend.

phsieh2005 · August 26, 2017, 08:37

Thanks a lot Bruno!

I will give the OpenFOAM-dev installation a try.

>They don't provide step-by-step instructions as detailed as the ones at openfoamwiki.net, but if people don't complain about the official ones, then the current format will stay as-is.

where should we post suggestion that a step-by-step instructions be provided? I think it is worth it to provide step-by-step instructions for people who are not experts in both linux and OpenFOAM.

Pei

wyldckat · August 26, 2017, 14:57

Hi Pei,

For the distributions done by the OpenFOAM Foundation, you can report this on their bug tracker: https://bugs.openfoam.org

I do strongly suggest that you make a strong case on what specific improvements should be done to the instructions on the OpenFOAM Foundation website. Simply stating "we need official step-by-step instructions" will likely be disregarded.

As for the distributions done by ESI-OpenCFD, you can report this on their issue tracker: https://develop.openfoam.com/Develop...AM-plus/issues

The same protocol still applies, namely that a strong case should be made regarding the need to have step-by-step instructions.

Best regards,
Bruno

August 20, 2017, 10:55	compile OpenFOAM v5 source on Ubuntu 1706?	#1
phsieh2005 Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 334 Rep Power: 18	Dear OpenFOAMers, I am wondering if anyone posted steps on how to compile OpenFOAM v5 source codes on UBuntu 1706? I tried to following the steps for OpenFOAM v4.1 on Ubuntu 1606, but, the steps did not work for v5 on Ubuntu 1706. Thanks! Pei

August 25, 2017, 13:57		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Quick answer: The official installation instructions are provided here: https://openfoam.org/download/5-0-source/ They don't provide step-by-step instructions as detailed as the ones at openfoamwiki.net, but if people don't complain about the official ones, then the current format will stay as-is. As for the ones that are provided at openfoamwiki.net, I haven't had the time+patience to write and test the installation of OpenFOAM 5.0. However, I have revised and updated the ones for OpenFOAM-dev here: https://openfoamwiki.net/index.php/I...OAM-dev/Ubuntu Although I haven't tried using Ubuntu 17.04 yet... and there are a few bugs in how makeParaView works on the "ThirdParty-5.0" package, which should use instead the one from "ThirdParty-5.x". I will try to look into this during this weekend. phsieh2005 likes this. __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[waves2Foam] Tripping over several build issues with OpenFOAM 2.1.1	Yage	OpenFOAM Community Contributions	18	February 15, 2016 02:02
[Other] How to use finite area method in official OpenFOAM 2.2.0?	Detian Liu	OpenFOAM Meshing & Mesh Conversion	4	November 3, 2015 03:04
[foam-extend.org] problem when installing foam-extend-1.6	Thomas pan	OpenFOAM Installation	7	September 9, 2015 21:53
[swak4Foam] swak4Foam-groovyBC build problem	zxj160	OpenFOAM Community Contributions	18	July 30, 2013 13:14
Installation of OpenFOAM-1.6 on Ubuntu 9.10	marval	OpenFOAM Installation	2	March 17, 2010 08:33

August 26, 2017, 08:37		#3
phsieh2005 Senior Member Pei-Ying Hsieh Join Date: Mar 2009 Posts: 334 Rep Power: 18	Thanks a lot Bruno! I will give the OpenFOAM-dev installation a try. >They don't provide step-by-step instructions as detailed as the ones at openfoamwiki.net, but if people don't complain about the official ones, then the current format will stay as-is. where should we post suggestion that a step-by-step instructions be provided? I think it is worth it to provide step-by-step instructions for people who are not experts in both linux and OpenFOAM. Pei

August 26, 2017, 14:57		#4
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Hi Pei, For the distributions done by the OpenFOAM Foundation, you can report this on their bug tracker: https://bugs.openfoam.org I do strongly suggest that you make a strong case on what specific improvements should be done to the instructions on the OpenFOAM Foundation website. Simply stating "we need official step-by-step instructions" will likely be disregarded. As for the distributions done by ESI-OpenCFD, you can report this on their issue tracker: https://develop.openfoam.com/Develop...AM-plus/issues The same protocol still applies, namely that a strong case should be made regarding the need to have step-by-step instructions. Best regards, Bruno