CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Installation

[OpenFOAM.org] Problem compiling PV4Readers into OpenFOAM 2.4.0

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 14, 2018, 10:05
Default Problem compiling PV4Readers into OpenFOAM 2.4.0
  #1
New Member
 
Erik
Join Date: Nov 2018
Location: Darmstadt
Posts: 1
Rep Power: 0
Spurius is on a distinguished road
Greetings,


I am trying to do some OpenFOAM simulations with the assistance of ParaView. Beforehand: I am new to all of these applications, so excuse me, please, if my terminology (and knowledge) isn't always on point

OpenFOAM (2.4.0) seems to be installed correctly. It has to be mentioned, that I am a new user on this PC (OpenSUSE 42.3; x86_64) on which OpenFOAM and ParaView have already been used.
This is why I only had to build a new user Folder in the OpenFOAM-folder (instead of installing from scratch). What was left was to compile ParaView4 using

Code:
$> cd $WM_THIRD_PARTY_DIR
$> ./makeParaView4
which seemed to be successful and to compile the PV4Readers using

Code:
$> cd $FOAM_UTILITIES/postProcessing/graphics/PV4Readers
• $> wmSET
• ./Allwclean
• ./Allwmake
which didn't work. The last command leaves me with

Code:
ERROR: ParaView not found in /home/ehrhardt/OpenFOAM/ThirdParty-2.4.0/platforms/linux64Gcc/ParaView-4.1.0
It neither did work with the installation instructions given here (beginning from step 12):

https://openfoamwiki.net/index.php/I...2.4.0/openSUSE

I am aware that many people had a similar Problem before me. I tried, for example, the fixes suggested here:

Paraview not found when installing OpenFoam to Ubuntu 14.04

As an example, I will also add the log that was written using this code (had to add .txt to it to be able to upload it):

Code:
cd $WM_THIRD_PARTY_DIR

sed -i -e 's=CUDA_FOUND=OFF=g' ParaView-4.1.0/Plugins/SciberQuestToolKit/SciberQuest/CMakeLists.txt

./makeParaView4 -qmake $(which qmake-qt4) > log.makePV 2>&1

I hope that was enough information. I was trying not to miss out on anything doing my first post here.
I also opened up a thread on:

https://discourse.paraview.org/t/pv4...o-openfoam/902

Thanks for the help,

Erik
Attached Files
File Type: txt log.makePV.txt (1.7 KB, 2 views)
Spurius is offline   Reply With Quote

Reply

Tags
installation, openfoam 2.4.0, opensuse, paraview 4.1.0

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Openfoam for windows 16.02 [CFD support] -problem with paraview ditmeyer OpenFOAM Installation 3 May 15, 2017 13:04
New OpenFOAM Forum Structure jola OpenFOAM 2 October 19, 2011 07:55
[swak4Foam] problem in compiling groovyBC in OpenFoam 1.71 javad814 OpenFOAM Community Contributions 4 July 31, 2011 05:33
OpenFOAM Install problem masb OpenFOAM 3 May 25, 2009 12:32
Problem installing OpenFOAM 1.5 installation on RHEL 4. vwsj84 OpenFOAM Installation 4 April 23, 2009 05:48


All times are GMT -4. The time now is 23:22.