[OpenFOAM.org] Installation on Ubuntu Subsytem - Failed to fetch

engingreed · June 28, 2019, 11:52

Hello everyone,

Manytimes, I installed OpenFoam on my home computer and office pc. However, nowadays I can not re-install OpenFoam on my home pc. I tried everything and look at every forum. But I could not solve the problem. While I tried to install OF, I follow the instructures. But after, sudo apt-get update; I write the sudo apt-get -y install openfoam6 and I get this:

Code:

E: Failed to fetch https://netix.dl.sourceforge.net/pro...0620_amd64.deb  Could not handshake: The TLS connection was non-properly terminated. [IP: 87.121.121.2 443]
E: Failed to fetch https://netix.dl.sourceforge.net/pro...0221_amd64.deb  Could not handshake: The TLS connection was non-properly terminated. [IP: 87.121.121.2 443]E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

In upper lines I saw this:

Code:

Need to get 153 MB/318 MB of archives.
After this operation, 1929 MB of additional disk space will be used.
Get:3 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgstreamer1.0-0 amd64 1.14.4-1~ubuntu18.04.1 [862 kB]Err:1 https://netix.dl.sourceforge.net/pro...am/foam/ubuntu bionic/main amd64 openfoam6 amd64 20190620
  Could not handshake: The TLS connection was non-properly terminated. [IP: 87.121.121.2 443]
Err:2 https://netix.dl.sourceforge.net/pro...am/foam/ubuntu bionic/main amd64 paraviewopenfoam56 amd64 0-20190221
  Could not handshake: The TLS connection was non-properly terminated. [IP: 87.121.121.2 443]
Get:4 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 libgstreamer-plugins-base1.0-0 amd64 1.14.4-1ubuntu1.1~ubuntu18.04.1 [684 kB]
Get:5 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 linux-libc-dev amd64 4.15.0-54.58 [1004 kB]
Get:6 http://archive.ubuntu.com/ubuntu bionic-updates/main amd64 gstreamer1.0-plugins-base amd64 1.14.4-1ubuntu1.1~ubuntu18.04.1 [585 kB]
Fetched 3136 kB in 12s (257 kB/s)

wyldckat · July 9, 2019, 18:56

Quick answer: After a quick search for:

Code:

ubuntu wsl Could not handshake: The TLS connection was non-properly terminated.

it seems that it's due to a proxy error for HTTPS handling. Brief instructions on how to fix that are provided here: https://askubuntu.com/a/1014978

engingreed · August 3, 2019, 10:45

Quote:

Originally Posted by wyldckat

Quick answer: After a quick search for:

Code:

ubuntu wsl Could not handshake: The TLS connection was non-properly terminated.

it seems that it's due to a proxy error for HTTPS handling. Brief instructions on how to fix that are provided here: https://askubuntu.com/a/1014978

OK the problem was occured becaouse of my antivir-software. It solved now. Thank you.!!

VVN · October 7, 2020, 14:06

I am getting the same error. Do I need to restart the process of installation from beginning or do we have any other solution? Please help

petros · October 8, 2020, 07:58

Hi,

The error related to the initial post was due to the fact that an antivirus tool was blocking the installation.

If this is not the case for you, clean everything and restart the installation following step by step the respective guides. See here.

Best,
Petros

VVN · October 8, 2020, 13:26

Thank you for reply. The error was due to bad network. But I restarted the process by entering:

sudo apt-get update

sudo apt-get -y install openfoam8

and it worked

manafaero · June 17, 2021, 14:40

First Uninstall the OpenFOAM
https://askubuntu.com/questions/1246...g-from-openfoa

sudo apt-get clean

Then try Using
1. sudo apt-get update
2. sudo apt-get upgrade
Then try to reinstall Openfoam

July 9, 2019, 18:56		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Quick answer: After a quick search for: Code: ubuntu wsl Could not handshake: The TLS connection was non-properly terminated. it seems that it's due to a proxy error for HTTPS handling. Brief instructions on how to fix that are provided here: https://askubuntu.com/a/1014978 __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Foam::error::printStack(Foam::Ostream&) with simpleFoam -parallel	U.Golling	OpenFOAM Running, Solving & CFD	52	September 23, 2023 03:35
Initial conditions for uniform flow	andreas	OpenFOAM	5	November 16, 2012 15:00
[OpenFOAM] ParaView/Parafoam error when making animation	Disco_Caine	ParaView	6	September 28, 2010 09:54
user subroutine error	CFDUSER	CFX	2	December 9, 2006 06:31
user defined function	cfduser	CFX	0	April 29, 2006 10:58

October 7, 2020, 14:06		#4
VVN New Member Vijay Join Date: Feb 2020 Posts: 7 Rep Power: 6	I am getting the same error. Do I need to restart the process of installation from beginning or do we have any other solution? Please help

October 8, 2020, 07:58		#5
petros Member Petros Ampatzidis Join Date: Oct 2018 Location: Bath, UK Posts: 64 Rep Power: 7	Hi, The error related to the initial post was due to the fact that an antivirus tool was blocking the installation. If this is not the case for you, clean everything and restart the installation following step by step the respective guides. See here. Best, Petros

October 8, 2020, 13:26		#6
VVN New Member Vijay Join Date: Feb 2020 Posts: 7 Rep Power: 6	Thank you for reply. The error was due to bad network. But I restarted the process by entering: sudo apt-get update sudo apt-get -y install openfoam8 and it worked

June 17, 2021, 14:40		#7
manafaero New Member Manaf Muhammed Join Date: Oct 2018 Posts: 20 Rep Power: 7	First Uninstall the OpenFOAM https://askubuntu.com/questions/1246...g-from-openfoa sudo apt-get clean Then try Using 1. sudo apt-get update 2. sudo apt-get upgrade Then try to reinstall Openfoam