CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (https://www.cfd-online.com/Forums/openfoam-installation/)
-   -   [foam-extend.org] foam-extend 4.1 (https://www.cfd-online.com/Forums/openfoam-installation/226915-foam-extend-4-1-a.html)

S_teph_2000 May 12, 2020 01:48
foam-extend 4.1
 
Hello,
I have foam-extend 4.1 and openfoam v1906 installed on Ubuntu1804 (Windows subsystem). I'm also using aliases to switch between both environments.
the ESI version works without any problem, but when I try to use anything in foam-extend, for example "blockMesh -help", I get the following error:
Code:
--> FOAM FATAL ERROR:
          Could not find mandatory etc entry (mode=ugo)
          'controlDict'
same thing when I try "simpleFoam -help"
I saw in a previous post by Wyldckat that this might happen when OF is installed in a directory containing spaces, but it is not the case. the command which foamExec gives:
Code:
/opt/foam/foam-extend-4.1/bin/foamExec
the "tut" command goes correctly to foam-extend tutorials folder, so the environment seems to be correctly loaded.
Thanks in advance for your help,

Kazu

S_teph_2000 May 26, 2020 02:21
Same problem
 
No one?
Is this Me? Covid-19? or the participation rate in the forum has been falling lately???:confused:

gozo May 28, 2020 09:40
I have same kind of problem. You foam-extend doesn't look that it was installed fully.
How was your installation process like? In my system, the installation wouldn't budge.

gozo June 2, 2020 02:27
It may be because the extend version didn't run from source.
you can make another version into comment like below

$vi ~/.bashrc
(at almost last line)
# source /opt/OpenFOAM/OpenFOAM-v1912/etc/bashrc

and then
$fe40

then run the case by extend version.

And, I want to ask you, did you install 4.1 without any problem?
Because I am trying to install extend 4.1 in ubuntu 18.04 LTS (WSL) but still having trouble.

S_teph_2000 June 7, 2020 05:25
Extend 4.1
 
Quote:
Originally Posted by gozo (Post 772907)
It may be because the extend version didn't run from source.
you can make another version into comment like below

$vi ~/.bashrc
(at almost last line)
# source /opt/OpenFOAM/OpenFOAM-v1912/etc/bashrc

and then
$fe40

then run the case by extend version.

And, I want to ask you, did you install 4.1 without any problem?
Because I am trying to install extend 4.1 in ubuntu 18.04 LTS (WSL) but still having trouble.
Hey Gozo,

I installed version 4.1 without any obvious error or warning. Did you try doin an apt-get -update Before installing? The problem is the environment. I will try again with 4.0...

gozo March 3, 2021 02:03
Quote:
Originally Posted by S_teph_2000 (Post 773674)
Hey Gozo,

I installed version 4.1 without any obvious error or warning. Did you try doin an apt-get -update Before installing? The problem is the environment. I will try again with 4.0...
Hi, Stephane.
I'm using the extend-4.1 version now, too. My installation error was resolved after installing the WSL2.
And it does not look that every solver works, but I have been figuring out.

xCFD September 22, 2021 01:01
Mesh problem in foam extent 4.0
 
Hello, I am trying to use foam extend 4.0. Can anyone please tell me if there is anyway to use OpenFOAM mesh on foam extent? because apparently the both use different mesh files. i cannot find any code to convert meshes. If anyone can help me in this regard?

mohammad November 10, 2021 06:55
The same error
 
1 Attachment(s)
Hello everyone,

I have a PC a Foam Extend 4.0 has been installed on it by another person who does not know anything about OF.

When I try to run OF, I get the following error,
could you please help me to resolve this. Attachment 87039


All times are GMT -4. The time now is 01:47.