Installation paraview34 amp foamToVTK

jano · February 26, 2009, 13:31

Hi,

For all that have problems with linking paraview to OpenFoam, you can ignore this step (at least as a new user).

Just use the command: foamToVTK before launching paraview to visualize your results.

BTW, if you need to install paraview, paraview3.4 is available at:
http://www.paraview.org/paraview/res.../software.html

Good luck,

Jean

openfoam_user · February 27, 2009, 02:48

Dear Jean,

I have problems with paraFoam with Linux11.1.

Using paraview3.4 with foamToVTK it works well.

What are the drawbacks of this solution ?

Or what are the advantages to use paraFoam ?

Thanks,
Stephane

jano · February 27, 2009, 13:35

Stephane,

I am a new user too! I only used this way so far.

My understanding is that the "paraFoam" command launches paraview and does some file conversion as well.

Jean

February 26, 2009, 13:31	Hi, For all that have probl	#1
jano New Member Jean Lachaud Join Date: Mar 2009 Location: Moffett Field, Ca Posts: 6 Rep Power: 17	Hi, For all that have problems with linking paraview to OpenFoam, you can ignore this step (at least as a new user). Just use the command: foamToVTK before launching paraview to visualize your results. BTW, if you need to install paraview, paraview3.4 is available at: http://www.paraview.org/paraview/res.../software.html Good luck, Jean

February 27, 2009, 02:48	Dear Jean, I have problems	#2
openfoam_user Senior Member stephane sanchi Join Date: Mar 2009 Posts: 314 Rep Power: 18	Dear Jean, I have problems with paraFoam with Linux11.1. Using paraview3.4 with foamToVTK it works well. What are the drawbacks of this solution ? Or what are the advantages to use paraFoam ? Thanks, Stephane

February 27, 2009, 13:35	Stephane, I am a new user t	#3
jano New Member Jean Lachaud Join Date: Mar 2009 Location: Moffett Field, Ca Posts: 6 Rep Power: 17	Stephane, I am a new user too! I only used this way so far. My understanding is that the "paraFoam" command launches paraview and does some file conversion as well. Jean

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with channeloodles and foamToVTK	farbfilm	OpenFOAM Running, Solving & CFD	0	October 31, 2008 05:28
FoamToVTK and MayaVi	alexandrepereira	OpenFOAM Post-Processing	57	August 11, 2008 04:15
FoamToVTK output names	hartinger	OpenFOAM Post-Processing	2	March 29, 2007 06:49
[OpenFOAM] FoamToVTK problem	oevermann	ParaView	6	July 11, 2006 15:10
[OpenFOAM] FoamToVTK error with OF 13	melanie	ParaView	1	May 22, 2006 04:40