OpenFOAM in CAELinux

airfoil · December 30, 2007, 05:44

Hi All OpenFOAM Lover,
I had found a Linux distro which come with OpenFoam complete installation and workable. It is CAELinux. Just dive to http://caelinux.com/CMS/ and you can download it. It not only contains Openfoam but almost all Open Source CAE application such as Openflower and etc. It has used PCLinuxOS as the running OS. That's all.
Airfoil

markc · March 8, 2008, 17:16

How about paraview?
On my installation it makes the system to shut down.
I probably used exactly the same installation.

Have you been able to use paraview?

Brgds,

Mark

lofty · March 10, 2008, 08:15

Hi Mark

Are you connected to internet? I think paraview needs internet connection to function properly.

markc · May 14, 2008, 05:09

Sorry for the late reply: yes I am connected. I finally installed paraview 3.2.1 and use foamToVTK to convert results instead of parafoam.
It works perfect now.

Brgds,
Mark

December 30, 2007, 05:44	Hi All OpenFOAM Lover,	#1
airfoil New Member Leong Join Date: Mar 2009 Location: Malaysia Posts: 20 Rep Power: 17	Hi All OpenFOAM Lover, I had found a Linux distro which come with OpenFoam complete installation and workable. It is CAELinux. Just dive to http://caelinux.com/CMS/ and you can download it. It not only contains Openfoam but almost all Open Source CAE application such as Openflower and etc. It has used PCLinuxOS as the running OS. That's all. Airfoil

March 8, 2008, 17:16	How about paraview? On my ins	#2
markc Senior Member Mark Couwenberg Join Date: Mar 2009 Location: Netherlands Posts: 130 Rep Power: 17	How about paraview? On my installation it makes the system to shut down. I probably used exactly the same installation. Have you been able to use paraview? Brgds, Mark

March 10, 2008, 08:15	Hi Mark Are you connected t	#3
lofty New Member OpenFOAM Newbie Join Date: Mar 2009 Posts: 20 Rep Power: 17	Hi Mark Are you connected to internet? I think paraview needs internet connection to function properly.

May 14, 2008, 05:09	Sorry for the late reply: yes	#4
markc Senior Member Mark Couwenberg Join Date: Mar 2009 Location: Netherlands Posts: 130 Rep Power: 17	Sorry for the late reply: yes I am connected. I finally installed paraview 3.2.1 and use foamToVTK to convert results instead of parafoam. It works perfect now. Brgds, Mark

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFoam vs CFX5 mass balance in OpenFoam	tangd	OpenFOAM Running, Solving & CFD	33	May 23, 2010 16:36
[blockMesh] CheckMesh error using a tutorial from OpenFOAM 114 with openFOAM 13	martapajon	OpenFOAM Meshing & Mesh Conversion	7	January 21, 2008 12:52
OpenFOAM in CAELinux	airfoil	OpenFOAM	0	December 30, 2007 06:40
OpenFOAM users in Munich OpenFOAM benutzer in M%c3%bcnchen	jaswi	OpenFOAM	0	August 3, 2007 13:11
A new Howto on the OpenFOAM Wiki Compiling OpenFOAM under Unix	mbeaudoin	OpenFOAM Installation	2	April 28, 2006 08:54