FoamXHosTBrowser trouble

nnick75 · October 16, 2006, 02:39

Dear all,

after the installation of OpenFOAM 1.3 on a Linux AMD64 machine, I cannoit open FoamX because of a problem in Host Browser application. I am pretty sure to have compiled and built everything in 64bit mode.
Here attached the output from the system.

[pini@lind003 pini]$ FoamX
Starting NameServer with inet:lind003:1234 ...
Starting FoamX Host Browser with inet:lind003:1234 ...
/*---------------------------------------------------------------------------*\
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 1.3 |
| \ / A nd | Web: http://www.openfoam.org |
| \/ M anipulation | |
\*---------------------------------------------------------------------------*/

free(): invalid pointer 0x57b2e0!
/home/pini/OpenFOAM/OpenFOAM-1.3/bin/runFoamXHB: line 131: 5507 Segmentation fault FoamXHostBrowser -ORBNamingAddr $myIOP
runFoamXHB : cleanup
runFoamXHB: Killing name server nsd(pid 5505).

After that I have to use ctrl+C 2 times to stop the system.

Does anyone idea of what's going on?

Thanks in advance

Nick

dmoroian · October 16, 2006, 02:48

No ideea, but it seems to be a programming error. Though, you have an already compiled version that fits your hardware (linuxamd64), on the website. It waits for you to download it

Dragos

October 16, 2006, 02:39	Dear all, after the install	#1
nnick75 New Member Nicola Pini Join Date: Mar 2009 Posts: 1 Rep Power: 0	Dear all, after the installation of OpenFOAM 1.3 on a Linux AMD64 machine, I cannoit open FoamX because of a problem in Host Browser application. I am pretty sure to have compiled and built everything in 64bit mode. Here attached the output from the system. [pini@lind003 pini]$ FoamX Starting NameServer with inet:lind003:1234 ... Starting FoamX Host Browser with inet:lind003:1234 ... /---------------------------------------------------------------------------\ \| ========= \| \| \| \ / F ield \| OpenFOAM: The Open Source CFD Toolbox \| \| \ / O peration \| Version: 1.3 \| \| \ / A nd \| Web: http://www.openfoam.org \| \| \/ M anipulation \| \| \---------------------------------------------------------------------------/ free(): invalid pointer 0x57b2e0! /home/pini/OpenFOAM/OpenFOAM-1.3/bin/runFoamXHB: line 131: 5507 Segmentation fault FoamXHostBrowser -ORBNamingAddr $myIOP runFoamXHB : cleanup runFoamXHB: Killing name server nsd(pid 5505). After that I have to use ctrl+C 2 times to stop the system. Does anyone idea of what's going on? Thanks in advance Nick

October 16, 2006, 02:48	No ideea, but it seems to be a	#2
dmoroian Senior Member Dragos Join Date: Mar 2009 Posts: 648 Rep Power: 20	No ideea, but it seems to be a programming error. Though, you have an already compiled version that fits your hardware (linuxamd64), on the website. It waits for you to download it Dragos

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDS trouble	Jenny	FLUENT	0	July 7, 2008 03:27
UDS trouble	Jenny	FLUENT	0	July 6, 2008 04:09
FoamXHostBrowser error while loading shared libraries libFoamXso cannot restore segment prot after reloc Permission denied	mdmk	OpenFOAM Pre-Processing	0	June 25, 2008 00:50
Problem FoamXHostBrowser not found after successful compilation	david_flo1	OpenFOAM	0	January 21, 2008 22:04
udf trouble	Eric	FLUENT	1	July 6, 2004 14:49