OpenFOAM on opensuse 11.2

balkrishna · February 16, 2011, 07:58

Hi,
I am installing OpenFOAM 171 on OpenSUSE . I have successfully installed the software according to the instructions given on the site . However when i run icoFoam , the terminal shouts :
“icoFoam: /lib/libc.so.6: version `GLIBC_2.11′ not found (required by /opt/openfoam171/lib/linuxGccDPOpt/libOpenFOAM.so)
”

Acc to me , glibc is not installed properly . To overcome the prob i did a :
“sudo zypper in -t pattern devel_C_C++
”
which outputted :
” ‘devel_C_C++’ is already installed. ”
Can you help me out in solving the error.

wyldckat · February 19, 2011, 13:43

Greetings Balkrishna,

Sadly the RPM that is available at www.openfoam.com is for openSUSE 11.3 and above, so it won't work with 11.2

In your case, the problem is that the base system glibc library on openSUSE 11.2 is missing functionalities that the one in 11.3 already has. You will have to build OpenFOAM from source.

Ironically, you can follow these instructions, since they are applicable to both openSUSE versions: Installing OpenFOAM 1.7 on openSUSE 11.3

Best regards,
Bruno

February 16, 2011, 07:58	OpenFOAM on opensuse 11.2	#1
balkrishna Senior Member Balkrishna Patankar Join Date: Mar 2009 Location: Pune Posts: 123 Rep Power: 17	Hi, I am installing OpenFOAM 171 on OpenSUSE . I have successfully installed the software according to the instructions given on the site . However when i run icoFoam , the terminal shouts : “icoFoam: /lib/libc.so.6: version `GLIBC_2.11′ not found (required by /opt/openfoam171/lib/linuxGccDPOpt/libOpenFOAM.so) ” Acc to me , glibc is not installed properly . To overcome the prob i did a : “sudo zypper in -t pattern devel_C_C++ ” which outputted : ” ‘devel_C_C++’ is already installed. ” Can you help me out in solving the error.

February 19, 2011, 13:43		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Balkrishna, Sadly the RPM that is available at www.openfoam.com is for openSUSE 11.3 and above, so it won't work with 11.2 In your case, the problem is that the base system glibc library on openSUSE 11.2 is missing functionalities that the one in 11.3 already has. You will have to build OpenFOAM from source. Ironically, you can follow these instructions, since they are applicable to both openSUSE versions: Installing OpenFOAM 1.7 on openSUSE 11.3 Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installation how-to's - OpenFOAM 1.7 - openSUSE 11.2 and 11.3	alberto	OpenFOAM Installation	24	August 4, 2010 00:48
Installing openfoam 1.7 on opensuse 11.2	navarrom	OpenFOAM	7	July 12, 2010 11:47
Installing OpenFOAM-1.6.x on OpenSUSE 11.2, A question to the developers	Ahmed	OpenFOAM Installation	0	December 5, 2009 05:03
Critical errors during OpenFoam installation in OpenSuse 11.0	amscosta	OpenFOAM	5	May 1, 2009 14:06
OpenFOAM 1.5 installation on OpenSUSE 11.0	bigphil	OpenFOAM Installation	16	April 29, 2009 06:28