|
[Sponsors] |
[snappyHexMesh] some questions in SnappyHexMesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 23, 2012, 09:59 |
some questions in SnappyHexMesh
|
#1 |
New Member
Join Date: Aug 2012
Posts: 14
Rep Power: 13 |
Hi everyone,
I got some questions would like to ask you, The first one, in snappyHexMesh tutorial (in OPENFOAM user guide), there are more cells around the car surface, which part in snappyhexDict is to achieve this? Secondly, what does the "level" mean? for example, refinementSurfaces sphere.stl { level (2 2) ... what are the real meaning of the numbers in the ()? any detailed explanation? Finally, normally we need a blockMesh as a blackground mesh for snappyHex, for my cylinder case, if the blockMesh size is larger than the cylinder , the top/bottom surface generated is not smooth (https://sites.google.com/site/snappy...ightblock_.png) while if i use small blockMesh (smaller than the cylinder) , the surface of top/bottom is quite good (https://sites.google.com/site/snappy...mallblock_.png). Since I need the background block as a water tank and to test the forces on the cylinder, could I use any utility like Cellset to "define" a small region in the block as a background mesh for cylinder, or maybe with 2 blockMesh, one small block for generating cylinder and one for water tank? Many thanks, Cloudy |
|
August 23, 2012, 13:56 |
|
#2 | |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128 |
Hi Cloudy,
I'm in a hurry, so I'll have to quote an answer of mine I gave a few minutes ago: Quote:
Bruno
__________________
|
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] some basic questions about snappyhexmesh | fatemehfarshi62 | OpenFOAM Meshing & Mesh Conversion | 0 | January 3, 2016 03:29 |
[snappyHexMesh] OFW10 snappyHexMesh Training Session Questions (follow up) | chegdan | OpenFOAM Meshing & Mesh Conversion | 3 | July 20, 2015 11:10 |
[snappyHexMesh] snappyHexMesh questions??? | liu-t11 | OpenFOAM Meshing & Mesh Conversion | 3 | March 3, 2015 16:57 |
[snappyHexMesh] questions about snappyHexMesh | xurenyi | OpenFOAM Meshing & Mesh Conversion | 0 | June 11, 2014 02:53 |
[snappyHexMesh] A few simple questions about SnappyHexMesh. | suitup | OpenFOAM Meshing & Mesh Conversion | 1 | December 19, 2009 14:30 |