|April 15, 2008, 02:28||
Hello Message Board, I'm tr
Join Date: Mar 2009
Posts: 79Rep Power: 10
Hello Message Board,
I'm trying to use the function mergePatchPairs in order to solve the problem of hanging nodes.
The case can be described as follows:
Originally we have a closed channel with a square cylinder positioned vertically to the flow direction and is mounted on the front and back wall of the channel. In order to derive adequate results I'm defining several domains around the square cylinder becoming coarser from the inside to the outside domain.
___ ______________ ___
For this reason I'm defining a patch combined of 2,3,4 and merge it with 1 and also doing so for 6,7,8 and 5. That works fine!
BUT if I try to merge in the same principle in vertical direction, I receive the following error:
--> FOAM FATAL ERROR : Error in point ordering: mixed used and unused points at the end of point list.
Number of used points: 281841 and point 282051 is used by a live face.#0 Foam::error::printStack(Foam::-Ostream&) in "~/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libOpenFOAM.so"
What is going wrong here?
Is supposed, that there might be some problems on the corners that might be twice involved in merging (one time horizontal, other time vertical), therefore I changed the master to the slave patch and the other way round. but that didn't solve the problem either...
So please give me a hint!
Any help is appreciated!
Please excuse the bad picture
|Thread||Thread Starter||Forum||Replies||Last Post|
|Graphical viewer for blockMeshDict||grtabor||OpenFOAM Pre-Processing||22||March 14, 2013 04:05|
|BlockMeshDict with multiple hex blocks mergePatchPairs||prousa||OpenFOAM Native Meshers: blockMesh||1||May 14, 2009 23:42|
|BlockMeshDict keywords||msrinath80||OpenFOAM Native Meshers: blockMesh||2||September 20, 2007 09:14|
|Trouble with my first blockMeshDict file||osimonsimon||OpenFOAM Native Meshers: blockMesh||1||October 13, 2006 14:32|