[blockMesh] Mesh generation for wedge shaped blocks -- CFD Online Discussion Forums

December 19, 2007, 19:43	Mesh generation for wedge shaped blocks	#1
tdzurny New Member Trinia Dzurny Join Date: Mar 2009 Posts: 4 Rep Power: 17	I'm trying to modify a model for flow around a 180 degree bend by collapsing the corner blocks into a wedge shape, so that they have a 45 degree angle rather than a 90 degree angle. I'm having trouble with the generated mesh and was hoping someone could help. The link below shows the mesh. www.hydrocalc2000.com/images/corner_mesh.jpg As you can see from the image, the corners are successfully collapsed, but the mesh is collapsed as well, resulting in a cell distribution that isn't smooth. I'd like for the gridlines to follow the same straight lines as in the uncollapsed blocks. The cells on the collapsed edge would be wedges, in that case. Any ideas on how to do this? Thanks

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
State of mesh generation	Wandadars	Main CFD Forum	3	January 5, 2017 12:51
New Mesh Generation and Pre-Processing Forums	pete	Site News & Announcements	2	December 26, 2012 17:56
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 14:09
3-d elliptic generation mesh	Gang Sun	Main CFD Forum	5	September 16, 1998 00:24

All times are GMT -4. The time now is 13:17.