CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[blockMesh] Mesh skewness warning how to get rid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 7, 2005, 18:19
Default Mesh skewness warning how to get rid
  #1
New Member
 
Charles Ju
Join Date: Mar 2009
Posts: 15
Rep Power: 17
ploceus is on a distinguished road
Hi.
I created mesh input file, and after running blockMesh, it produces points, faces and cells file. I can also use paraView to look at grids. They look fine but I have the following message below that can't get rid of. What does skewness mean? And how do I get rid of them?

Thanks.

Creating merge patch pairs

Adding point and face zones
Adding topology modifiers
--> FOAM Warning :
From function primitiveMesh::checkFaceSkewness(const bool report, labelHashSet* setPtr) const
in file meshes/primitiveMesh/primitiveMeshCheck.C at line 838
Large face skewness detected. Max skewness = 285.058 percent.
This may impair the quality of the result.
212 highly skew faces detected.
Failed 1 mesh geometry checks.
Failed some mesh checks.

Writing polyMesh
ploceus is offline   Reply With Quote

Old   December 7, 2005, 20:37
Default Mesh skewness means that the l
  #2
Senior Member
 
Hrvoje Jasak
Join Date: Mar 2009
Location: London, England
Posts: 1,904
Rep Power: 33
hjasak will become famous soon enough
Mesh skewness means that the line connecting two cell centres misses the centre of the face between them, in your case by quite a lot.

This is only a warning and you can probably ignore it, but beware of the influence of the disretisation error to the solution accuracy in that region.

If you want to remove the error, you need to work on making a better mesh.

Enjoy,

Hrv
__________________
Hrvoje Jasak
Providing commercial FOAM/OpenFOAM and CFD Consulting: http://wikki.co.uk
hjasak is offline   Reply With Quote

Old   July 1, 2009, 06:01
Default comparing with Fluent
  #3
Member
 
Jagmohan Meena
Join Date: May 2009
Posts: 30
Rep Power: 16
jmmeena is on a distinguished road
Respected Sir,

Can you please tell relation between mesh skewness reported by gambit and mesh skewness reported by OpenFOAM.

What is the upper limit of mesh skewness in OpenFOAM which can be related to 0.92 in gambit.

regards,
JM
jmmeena is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
foamToTecplot360 thomasduerr OpenFOAM Post-Processing 121 June 11, 2021 11:05
using METIS functions in fortran dokeun Main CFD Forum 7 January 29, 2013 05:06
[swak4Foam] wmake groovyBC in OpenFOAM 1.7 ? randomid OpenFOAM Community Contributions 1 August 27, 2010 06:15
Cells with t below lower limit Purushothama Siemens 2 May 31, 2010 22:58
Compilation errors in ThirdPartymallochoard feng_w OpenFOAM Installation 1 January 25, 2009 07:59


All times are GMT -4. The time now is 19:46.