[snappyHexMesh] Bulky edges using snappyhexmesh -- CFD Online Discussion Forums

February 11, 2013, 09:38

Bulky edges using snappyhexmesh

New Member

Ingri Løvaas

Join Date: Jan 2013

Posts: 1

Rep Power: 0

Hi,
I'm having troubles getting the edges properly meshed using snappyHexMesh. The geometry is modelled using blender, where SnappyHexMeshDict and .stl files are generated through swiftsnap-addon in blender. As seen from the attached images the edges wont snap properly and the surface is bulky near the edges. I have tried alternative settings for the snapcontrol entries and disabled some of the MeshQualityControl as the minTetQuality (set to 0.5), but then the checkMesh fails. I would be really happy if anyone could help or leave some comments on what might be wrong. I have attached files for running snappyHexMesh.

Thanks,
Pin

Attached Files

	bulky_edge.jpg.zip (85.8 KB, 5 views)
	shm_project_filter.zip (38.0 KB, 3 views)

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] snappyHexMesh sticking point	natty_king	OpenFOAM Meshing & Mesh Conversion	11	February 20, 2024 09:12
[snappyHexMesh] SnappyHexMesh running killed!	Mark JIN	OpenFOAM Meshing & Mesh Conversion	7	June 14, 2022 01:37
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell	Arman_N	OpenFOAM Meshing & Mesh Conversion	1	May 20, 2019 17:16
[snappyHexMesh] sHM layer process keeps getting killed	MBttR	OpenFOAM Meshing & Mesh Conversion	4	August 15, 2016 03:21
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11

All times are GMT -4. The time now is 23:55.