[Salome] 2D Moving Mesh - Salome to OpenFoam WorkFlow

ADGlassby · August 23, 2013, 06:59

Hi,

After a lot of trial and error and going to and fro between forums I have come up with a workflow for preparing a mesh for a 2D moving mesh problem.

I have included a link to the PDF of the workflow for anyone who might be interested. I have made it fairly generic but there is sufficient detail in it to enable someone to follow it through with small amounts of additional research (mainly referring to the Salome tutorials).

I hope that this might be useful as the whole meshing subject was very bewildering to me in the first place and the learning curve can be staggering.

As far as CAD is concerned, as long as your CAD package can export a flat .iges file then you're in business. I used ViaCAD on a Mac for interest.

Please follow this link as the pdf file is a little bigger than I'm allowed to upload:
https://dl.dropboxusercontent.com/u/...ing%20Mesh.pdf

Best Regards
Andrew

ADGlassby · August 23, 2013, 07:01

I might add that the moving mesh I was trying to create was a rotating zone, a little like the tutorial mixerVesselAMI2D, before I moved onto the model I am trying to create.

Regards
Andrew

August 23, 2013, 06:59	2D Moving Mesh - Salome to OpenFoam WorkFlow	#1
ADGlassby Member Andrew Glassby Join Date: Sep 2009 Posts: 65 Rep Power: 16	Hi, After a lot of trial and error and going to and fro between forums I have come up with a workflow for preparing a mesh for a 2D moving mesh problem. I have included a link to the PDF of the workflow for anyone who might be interested. I have made it fairly generic but there is sufficient detail in it to enable someone to follow it through with small amounts of additional research (mainly referring to the Salome tutorials). I hope that this might be useful as the whole meshing subject was very bewildering to me in the first place and the learning curve can be staggering. As far as CAD is concerned, as long as your CAD package can export a flat .iges file then you're in business. I used ViaCAD on a Mac for interest. Please follow this link as the pdf file is a little bigger than I'm allowed to upload: https://dl.dropboxusercontent.com/u/...ing%20Mesh.pdf Best Regards Andrew startingWithCFD likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Salome] Problems for creating mesh in salome to OPENFOAM	bye bye my blue	OpenFOAM Meshing & Mesh Conversion	8	December 5, 2023 00:57
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
[Salome] Mesh Salome 7.3.0 to OpenFoam	Ahadi	OpenFOAM Meshing & Mesh Conversion	5	July 1, 2014 10:11
[Salome] OpenFoam case and salome mesh	marialiste	OpenFOAM Meshing & Mesh Conversion	1	December 4, 2013 14:56
Moving unstructured mesh with changing topology	meaton	OpenFOAM Running, Solving & CFD	6	April 27, 2008 07:56

August 23, 2013, 07:01		#2
ADGlassby Member Andrew Glassby Join Date: Sep 2009 Posts: 65 Rep Power: 16	I might add that the moving mesh I was trying to create was a rotating zone, a little like the tutorial mixerVesselAMI2D, before I moved onto the model I am trying to create. Regards Andrew