[Gmsh] tutorial ?

openfoam_user · January 27, 2010, 08:16

Hi,

I'd like to try gmsh.

Has someone a tutorial with :
- import STL file
- delete 2D mesh
- modify 1D mesh distribution on each edge (how can I select only one edge, and then the second, ...)
- generate 2D mesh
- generate 3D mesh
- export to OpenFOAM

Regards,

Stephane.

ggruber · January 30, 2010, 13:11

I am interrested too for such a tutorial !

That's only what i found at the internet:
http://amcg.ese.ic.ac.uk/index.php?t...:Gmsh_tutorial

ericnutsch · February 4, 2010, 00:46

ggruber's link is a good one.

I highly recommend dolfyn.net:
http://www.dolfyn.net/dolfyn/gmsh/tutorial06.html

If your planning on doing hex meshing this forum will help:
http://www.cfd-online.com/Forums/ope...-function.html

Cheers!

January 27, 2010, 08:16	tutorial ?	#1
openfoam_user Senior Member stephane sanchi Join Date: Mar 2009 Posts: 314 Rep Power: 18	Hi, I'd like to try gmsh. Has someone a tutorial with : - import STL file - delete 2D mesh - modify 1D mesh distribution on each edge (how can I select only one edge, and then the second, ...) - generate 2D mesh - generate 3D mesh - export to OpenFOAM Regards, Stephane.

January 30, 2010, 13:11	Gmsh tutorial available ?	#2
ggruber New Member ggruber Join Date: May 2009 Posts: 12 Rep Power: 16	I am interrested too for such a tutorial ! That's only what i found at the internet: http://amcg.ese.ic.ac.uk/index.php?t...:Gmsh_tutorial

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tutorial files	KITetima	FLUENT	8	November 23, 2019 16:05
AMI - Propeller Tutorial diverging	kingmaker	OpenFOAM Running, Solving & CFD	2	November 4, 2016 02:57
Tutorial For Workbench CFX Remesh	ashtonJ	CFX	2	April 26, 2014 21:19
Fluent Tutorial Guide Ch. 17: Non-Premixed Combust, THTR	MAE7509	FLUENT	0	January 22, 2014 20:59
STAR-CD Tutorial	shekhar aryal	STAR-CD	4	March 22, 2010 03:25

February 4, 2010, 00:46		#3
ericnutsch Senior Member Eric Nutsch Join Date: Sep 2009 Location: Eugene, Oregon USA Posts: 113 Rep Power: 16	ggruber's link is a good one. I highly recommend dolfyn.net: http://www.dolfyn.net/dolfyn/gmsh/tutorial06.html If your planning on doing hex meshing this forum will help: http://www.cfd-online.com/Forums/ope...-function.html Cheers!