CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Gmsh] gmsh variable mesh resolution?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 27, 2011, 20:23
Default gmsh variable mesh resolution?
  #1
Member
 
Kevin
Join Date: May 2011
Posts: 33
Rep Power: 14
murrdpirate is on a distinguished road
Is it possible to vary the element size factor over the domain? I can't seem to find an option to do this and I haven't seen anything online.
murrdpirate is offline   Reply With Quote

Old   June 27, 2011, 21:00
Default
  #2
Member
 
Kevin
Join Date: May 2011
Posts: 33
Rep Power: 14
murrdpirate is on a distinguished road
Guess I should have looked a little bit more....

http://www.geuz.org/gmsh/doc/texinfo...-element-sizes
murrdpirate is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water! divergence OpenFOAM Meshing & Mesh Conversion 0 January 23, 2019 05:17
SU2_CFD 3d euler not converge mine gmsh mesh lpustin SU2 2 December 3, 2017 14:43
[Gmsh] Gmsh: finer mesh on lower and upper wall of a channel CFDeProjekt OpenFOAM Meshing & Mesh Conversion 1 November 20, 2017 09:12
[snappyHexMesh] Layers:problem with curvature giulio.topazio OpenFOAM Meshing & Mesh Conversion 10 August 22, 2012 10:03
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52


All times are GMT -4. The time now is 08:46.