CFD Online Discussion Forums - [Commercial meshers] Interior Face Extraction in ICEM

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)

- - [Commercial meshers] Interior Face Extraction in ICEM (https://www.cfd-online.com/Forums/openfoam-meshing/132333-interior-face-extraction-icem.html)

AA29	March 29, 2014 17:41

Interior Face Extraction in ICEM

Hi everyone,

I have a hybrid mesh for an engine in ICEM . I want to extract some internal faces around the valves in the volume mesh and export those as .STL . I need the internal faces to create faceSets and cellsets later in OpenFOAM using toposset .

I just want to know if this kind is possible in ICEM ?
If anyone has experience, I would be really grateful if you share your thoughts.

Thank you in advance !

iman.pourmousavi

November 15, 2014 04:56

hi AA29
I am working on an engine and now i encounter a problem in hybrid meshing in ICEM . can you help me on dealing with this problem?:(
email: iman.pourmousavi@aol.com

All times are GMT -4. The time now is 06:54.