[Commercial meshers] star-ccm mesh to O\/F

wyldckat · September 18, 2012, 14:38

Alright... if you had checked the last link I posted, you would have seen the respective command for openSUSE... OK, it's not very similar, but the idea is still there.

Anyway, assuming you're the administrator of the machine:

Code:

su -
#the command above will ask for the password of administrator

zypper install -t pattern devel_C_C++

#after installing, run:
exit

Then try build "libccmio" once again.

emirust · September 19, 2012, 04:19

Hey all!

Will the procedure in post 27, with the file in post 29 work on OpenFoam 2.1.1 ?

Thanks!

wyldckat · September 19, 2012, 16:57

Greetings emirust,

I haven't tested with 2.1.1, but I think it should work.

I don't have time to test it now, so why don't you test it and tell us if it worked or not!?

Best regards,
Bruno

emirust · September 20, 2012, 12:18

Hey all!

I followed the procedure and built it on OF 2.1.1. Works well!

Thanks for the easy way wyldckat!

E.

Slamer · May 7, 2013, 05:31

Hi,
I am not able to compile it with OpenFOAM 2.2.0

I compile it with :
sudo bash
sudo wmake

and I get this error :

Code:

Making dependency list for source file ccm26ToFoam.C
SOURCE=ccm26ToFoam.C ;  g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3  -DNoRepository -ftemplate-depth-100 -I/opt/openfoam220/src/finiteVolume/lnInclude -I/opt/openfoam220/src/meshTools/lnInclude -I/opt/ThirdParty-2.2.0/libccmio-2.6.1 -I/opt/ThirdParty-2.2.0/libccmio-2.6.1/lnInclude -IlnInclude -I. -I/opt/openfoam220/src/OpenFOAM/lnInclude -I/opt/openfoam220/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linux64GccDPOpt/ccm26ToFoam.o
ccm26ToFoam.C: In function ‘int main(int, char**)’:
ccm26ToFoam.C:954:17: erreur: no matching function for call to ‘Foam::wallPolyPatch::wallPolyPatch(const Foam::word&, int&, Foam::label&, Foam::label&, const Foam::polyBoundaryMesh&)’
ccm26ToFoam.C:954:17: note: candidates are:
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:97:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::wallPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, const labelUList&, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:97:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::wallPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:87:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::wallPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, Foam::label, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:87:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::wallPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:83:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::wallPolyPatch&, const Foam::polyBoundaryMesh&)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:83:9: note:   candidate expects 2 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:73:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::word&, const Foam::dictionary&, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:73:9: note:   no known conversion for argument 4 from ‘Foam::label {aka int}’ to ‘const Foam::polyBoundaryMesh&’
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:62:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::word&, Foam::label, Foam::label, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:62:9: note:   candidate expects 6 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:49:7: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::wallPolyPatch&)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:49:7: note:   candidate expects 1 argument, 5 provided
ccm26ToFoam.C:966:17: erreur: no matching function for call to ‘Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::word&, int&, Foam::label&, Foam::label&, const Foam::polyBoundaryMesh&)’
ccm26ToFoam.C:966:17: note: candidates are:
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:97:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::symmetryPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, const labelUList&, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:97:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::symmetryPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:87:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::symmetryPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, Foam::label, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:87:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::symmetryPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:83:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::symmetryPolyPatch&, const Foam::polyBoundaryMesh&)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:83:9: note:   candidate expects 2 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:73:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::word&, const Foam::dictionary&, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:73:9: note:   no known conversion for argument 4 from ‘Foam::label {aka int}’ to ‘const Foam::polyBoundaryMesh&’
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:62:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::word&, Foam::label, Foam::label, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:62:9: note:   candidate expects 6 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:49:7: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::symmetryPolyPatch&)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:49:7: note:   candidate expects 1 argument, 5 provided
ccm26ToFoam.C:979:17: erreur: no matching function for call to ‘Foam::emptyPolyPatch::emptyPolyPatch(const Foam::word&, int&, Foam::label&, Foam::label&, const Foam::polyBoundaryMesh&)’
ccm26ToFoam.C:979:17: note: candidates are:
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:97:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::emptyPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, const labelUList&, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:97:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::emptyPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:87:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::emptyPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, Foam::label, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:87:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::emptyPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:83:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::emptyPolyPatch&, const Foam::polyBoundaryMesh&)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:83:9: note:   candidate expects 2 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:73:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::word&, const Foam::dictionary&, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:73:9: note:   no known conversion for argument 4 from ‘Foam::label {aka int}’ to ‘const Foam::polyBoundaryMesh&’
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:62:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::word&, Foam::label, Foam::label, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:62:9: note:   candidate expects 6 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:49:7: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::emptyPolyPatch&)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:49:7: note:   candidate expects 1 argument, 5 provided
ccm26ToFoam.C:993:17: erreur: no matching function for call to ‘Foam::polyPatch::polyPatch(const Foam::word&, int&, Foam::label&, Foam::label&, const Foam::polyBoundaryMesh&)’
ccm26ToFoam.C:993:17: note: candidates are:
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:214:9: note: Foam::polyPatch::polyPatch(const Foam::polyPatch&)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:214:9: note:   candidate expects 1 argument, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:204:9: note: Foam::polyPatch::polyPatch(const Foam::polyPatch&, const Foam::polyBoundaryMesh&, Foam::label, const labelUList&, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:204:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::polyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:194:9: note: Foam::polyPatch::polyPatch(const Foam::polyPatch&, const Foam::polyBoundaryMesh&, Foam::label, Foam::label, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:194:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::polyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:190:9: note: Foam::polyPatch::polyPatch(const Foam::polyPatch&, const Foam::polyBoundaryMesh&)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:190:9: note:   candidate expects 2 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:180:9: note: Foam::polyPatch::polyPatch(const Foam::word&, const Foam::dictionary&, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:180:9: note:   no known conversion for argument 4 from ‘Foam::label {aka int}’ to ‘const Foam::polyBoundaryMesh&’
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:169:9: note: Foam::polyPatch::polyPatch(const Foam::word&, Foam::label, Foam::label, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:169:9: note:   candidate expects 6 arguments, 5 provided
make: *** [Make/linux64GccDPOpt/ccm26ToFoam.o] Erreur 1
root@sabre2:/opt/openfoam220/applications/utilities/mesh/conversion/Optional# 
root@sabre2:/opt/openfoam220/applications/utilities/mesh/conversion/Optional# 
root@sabre2:/opt/openfoam220/applications/utilities/mesh/conversion/Optional# 
root@sabre2:/opt/openfoam220/applications/utilities/mesh/conversion/Optional# 
root@sabre2:/opt/openfoam220/applications/utilities/mesh/conversion/Optional# wmake ccm26ToFoam
SOURCE=ccm26ToFoam.C ;  g++ -m64 -Dlinux64 -DWM_DP -Wall -Wextra -Wno-unused-parameter -Wold-style-cast -Wnon-virtual-dtor -O3  -DNoRepository -ftemplate-depth-100 -I/opt/openfoam220/src/finiteVolume/lnInclude -I/opt/openfoam220/src/meshTools/lnInclude -I/opt/ThirdParty-2.2.0/libccmio-2.6.1 -I/opt/ThirdParty-2.2.0/libccmio-2.6.1/lnInclude -IlnInclude -I. -I/opt/openfoam220/src/OpenFOAM/lnInclude -I/opt/openfoam220/src/OSspecific/POSIX/lnInclude   -fPIC -c $SOURCE -o Make/linux64GccDPOpt/ccm26ToFoam.o
ccm26ToFoam.C: In function ‘int main(int, char**)’:
ccm26ToFoam.C:954:17: erreur: no matching function for call to ‘Foam::wallPolyPatch::wallPolyPatch(const Foam::word&, int&, Foam::label&, Foam::label&, const Foam::polyBoundaryMesh&)’
ccm26ToFoam.C:954:17: note: candidates are:
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:97:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::wallPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, const labelUList&, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:97:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::wallPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:87:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::wallPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, Foam::label, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:87:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::wallPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:83:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::wallPolyPatch&, const Foam::polyBoundaryMesh&)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:83:9: note:   candidate expects 2 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:73:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::word&, const Foam::dictionary&, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:73:9: note:   no known conversion for argument 4 from ‘Foam::label {aka int}’ to ‘const Foam::polyBoundaryMesh&’
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:62:9: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::word&, Foam::label, Foam::label, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:62:9: note:   candidate expects 6 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:49:7: note: Foam::wallPolyPatch::wallPolyPatch(const Foam::wallPolyPatch&)
/opt/openfoam220/src/OpenFOAM/lnInclude/wallPolyPatch.H:49:7: note:   candidate expects 1 argument, 5 provided
ccm26ToFoam.C:966:17: erreur: no matching function for call to ‘Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::word&, int&, Foam::label&, Foam::label&, const Foam::polyBoundaryMesh&)’
ccm26ToFoam.C:966:17: note: candidates are:
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:97:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::symmetryPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, const labelUList&, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:97:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::symmetryPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:87:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::symmetryPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, Foam::label, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:87:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::symmetryPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:83:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::symmetryPolyPatch&, const Foam::polyBoundaryMesh&)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:83:9: note:   candidate expects 2 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:73:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::word&, const Foam::dictionary&, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:73:9: note:   no known conversion for argument 4 from ‘Foam::label {aka int}’ to ‘const Foam::polyBoundaryMesh&’
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:62:9: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::word&, Foam::label, Foam::label, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:62:9: note:   candidate expects 6 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:49:7: note: Foam::symmetryPolyPatch::symmetryPolyPatch(const Foam::symmetryPolyPatch&)
/opt/openfoam220/src/OpenFOAM/lnInclude/symmetryPolyPatch.H:49:7: note:   candidate expects 1 argument, 5 provided
ccm26ToFoam.C:979:17: erreur: no matching function for call to ‘Foam::emptyPolyPatch::emptyPolyPatch(const Foam::word&, int&, Foam::label&, Foam::label&, const Foam::polyBoundaryMesh&)’
ccm26ToFoam.C:979:17: note: candidates are:
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:97:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::emptyPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, const labelUList&, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:97:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::emptyPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:87:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::emptyPolyPatch&, const Foam::polyBoundaryMesh&, Foam::label, Foam::label, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:87:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::emptyPolyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:83:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::emptyPolyPatch&, const Foam::polyBoundaryMesh&)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:83:9: note:   candidate expects 2 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:73:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::word&, const Foam::dictionary&, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:73:9: note:   no known conversion for argument 4 from ‘Foam::label {aka int}’ to ‘const Foam::polyBoundaryMesh&’
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:62:9: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::word&, Foam::label, Foam::label, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:62:9: note:   candidate expects 6 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:49:7: note: Foam::emptyPolyPatch::emptyPolyPatch(const Foam::emptyPolyPatch&)
/opt/openfoam220/src/OpenFOAM/lnInclude/emptyPolyPatch.H:49:7: note:   candidate expects 1 argument, 5 provided
ccm26ToFoam.C:993:17: erreur: no matching function for call to ‘Foam::polyPatch::polyPatch(const Foam::word&, int&, Foam::label&, Foam::label&, const Foam::polyBoundaryMesh&)’
ccm26ToFoam.C:993:17: note: candidates are:
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:214:9: note: Foam::polyPatch::polyPatch(const Foam::polyPatch&)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:214:9: note:   candidate expects 1 argument, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:204:9: note: Foam::polyPatch::polyPatch(const Foam::polyPatch&, const Foam::polyBoundaryMesh&, Foam::label, const labelUList&, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:204:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::polyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:194:9: note: Foam::polyPatch::polyPatch(const Foam::polyPatch&, const Foam::polyBoundaryMesh&, Foam::label, Foam::label, Foam::label)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:194:9: note:   no known conversion for argument 1 from ‘const Foam::word’ to ‘const Foam::polyPatch&’
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:190:9: note: Foam::polyPatch::polyPatch(const Foam::polyPatch&, const Foam::polyBoundaryMesh&)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:190:9: note:   candidate expects 2 arguments, 5 provided
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:180:9: note: Foam::polyPatch::polyPatch(const Foam::word&, const Foam::dictionary&, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:180:9: note:   no known conversion for argument 4 from ‘Foam::label {aka int}’ to ‘const Foam::polyBoundaryMesh&’
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:169:9: note: Foam::polyPatch::polyPatch(const Foam::word&, Foam::label, Foam::label, Foam::label, const Foam::polyBoundaryMesh&, const Foam::word&)
/opt/openfoam220/src/OpenFOAM/lnInclude/polyPatch.H:169:9: note:   candidate expects 6 arguments, 5 provided

I don't know what do I miss ?
I modified the options file in Make/options as mentionned before but I'm not sure it points to the correct target. What file are supposed to be missing ?

Thanks in advance.

wyldckat · May 7, 2013, 16:45

Greetings Slammer and welcome to the forum!

OpenFOAM 2.2.0 had a bug in the "ccm26ToFoam.C" source code file. The fix is this one: https://github.com/OpenFOAM/OpenFOAM...8af7a51d41fc4b
You can edit the file and manually replace the text in red for the text in green

Best regards,
Bruno

Slamer · May 13, 2013, 08:23

Hi,
I was not able to remeber where the git repo was.
It helps me more than expected

It compiles and 'work' on an exemple. Now, I just need to check if it does the right things.

Thanks a lot.

Jack220 · May 19, 2013, 15:52

Hi,

I'm using the Ubuntu Deb package version 2.2.0. I already changed the ccm26ToFoam.C as mentioned above. It still doesn't work. Do I need to do something else?

Thanks in advance

wyldckat · May 19, 2013, 16:01

Greetings Jack220 and welcome to the forum!

OK, after you've adapted the source code, what else did you do?
Did you follow the steps from post #37: http://www.cfd-online.com/Forums/ope...tml#post365682

Best regards,
Bruno

Jack220 · May 21, 2013, 13:46

Hi Bruno,

thank you for your fast answer!

I went in the direction with my .ccm file and executed the command "ccm26ToFoam file.ccm". The following message appeared: "command not found".
But in "/opt/openfoam220/applications/utilities/mesh/conversion/Optional/ccm26ToFoam" I can see my "ccm26ToFoam.C"-file.

I can't do the steps described in post #37:

First of all, I had to create the "ThirdParty-xxx" directory, because I could'nt find it.

And when I execute "AllwmakeLibccmio" the following error occurs:
/opt/openfoam220/ThirdParty-2.2.0/AllwmakeLibccmio: 39: .: Can't open tools/makeThirdPartyFunctions

Best regards,

Jack

wyldckat · May 21, 2013, 17:28

Hi Jack,

Attached is a new and improved installation script, specifically created for OpenFOAM 2.2.0 and 2.2.x, based on the one from my old posts, namely #27.

To use it:

Download the attached file.
Unpack it:
Code:
```
tar -xf ccm26local220.tar.gz
```
Go into the folder "ccm26local220" and run the script:
Code:
```
cd ccm26local220
./ccm26local
```
Follow the instructions the script gives you.

Best regards,
Bruno

Jack220 · May 22, 2013, 06:12

Thank you very much, Bruno! That works fine!

WildSinner · June 6, 2013, 02:54

Hey all!

Can you help me?

I have done all of instructions of the post #51. Instalation have installed correct.

I have little experience in the use of Linux and OpenFoam.

I have mesh from StarCCM+ 8.02. par example ~/Desktop/new/star_CCM.ccm
I want to covert this mesh to Fluent.
I understand that I have to convert this mesh to FOAM and FOAM to Fluent.

Could you write commands or sequencing that need to run these?

thanks in advance!

Sniper · August 2, 2013, 10:21

Hi Alexander,

Any luck with your conversion from StarCCM to Fluent. I want to a similar thing, your inputs will be helpful

wyldckat · August 17, 2013, 10:04

Greetings to all!

It's somewhat simple to perform this conversion, but I would say that it is very likely to result in having a bad mesh on Fluent's side, due to the 2 step conversion process.

Any way, the steps are:

On the command line, first copy a tutorial case from OpenFOAM's tutorials, because you're going to need a case to act as a base structure for having the intermediate mesh. For example:
Code:
```
cp -r $FOAM_TUTORIALS/incompressible/icoFoam/cavity .
cd cavity
```
Then run the CCM converter on your CCM+ mesh:
Code:
```
ccm26ToFoam yourmesh.ccm
```
Then export the current mesh to Fluent format:
Code:
```
foamMeshToFluent
```
The resulting mesh file is placed automatically inside the folder "fluentInterface".

But as I said, prepare yourself for complaining about the resulting bad mesh

Best regards,
Bruno

wflo · March 23, 2014, 20:32

Once you finish the steps in the post #51. Next I tried to do the following:

ccm26ToFoam yourmesh.ccm

From here the terminal window gave me an error.

--> FOAM FATAL IO ERROR:
cannot find file

file: /home/wilmer/Downloads/ccm26local220/system/controlDict at line 0.

From function regIOobject::readStream()
in file db/regIOobject/regIOobjectRead.C at line 73.

FOAM exiting

I'm new to this. Could anyone tell me if I'm following the directions right? Any steps that I'm missing here?

ziad · March 23, 2014, 22:48

Set up your case properly including the full hierarchy of folders and files. The error means you need to have a system/ folder with a valid controlDict file in it.

shipman · March 27, 2014, 02:20

Hi Bruno,

I am using version 2.1.1 and first i downloaded file at post 29 and followed the procedure as you explained at post 27. However it gives following error:

HTML Code:

baris@BICER:~/OpenFOAM/baris-2.1.1/applications/ccmio$ ./ccm26local
+ ./AllwmakeLibccmio
downloading libccmio-2.6.1.tar.gz from https://wci.llnl.gov/codes/visit/3rd_party/libccmio-2.6.1.tar.gz
--2014-03-27 16:14:11--  https://wci.llnl.gov/codes/visit/3rd_party/libccmio-2.6.1.tar.gz
Resolving wci.llnl.gov (wci.llnl.gov)... 198.128.246.10
Connecting to wci.llnl.gov (wci.llnl.gov)|198.128.246.10|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2014-03-27 16:14:12 ERROR 404: Not Found.

no download/libccmio-2.6.1.tar.gz to unpack
+ cd libccmio-2.6.1
./AllwmakeLibccmio: 61: cd: can't cd to libccmio-2.6.1
+ exit 1
+ [ -e /home/baris/OpenFOAM/baris-2.1.1/platforms/linux64GccDPOpt/lib/libccmio.so ]
baris@BICER:~/OpenFOAM/baris-2.1.1/applications/ccmio$

could you help to me how can i solve this problem.

Thanks in advance.

B

wyldckat · March 28, 2014, 17:50

Quote:

Originally Posted by shipman

I am using version 2.1.1 and first i downloaded file at post 29 and followed the procedure as you explained at post 27. However it gives following error:

Quick answer - Try the one from post #51: http://www.cfd-online.com/Forums/ope...tml#post429003

shipman · March 30, 2014, 05:23

Hi Bruno,

Thanks so much. It is working well

September 18, 2012, 14:38		#41
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Alright... if you had checked the last link I posted, you would have seen the respective command for openSUSE... OK, it's not very similar, but the idea is still there. Anyway, assuming you're the administrator of the machine: Code: su - #the command above will ask for the password of administrator zypper install -t pattern devel_C_C++ #after installing, run: exit Then try build "libccmio" once again. __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

September 19, 2012, 16:57		#43
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings emirust, I haven't tested with 2.1.1, but I think it should work. I don't have time to test it now, so why don't you test it and tell us if it worked or not!? Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

May 7, 2013, 16:45		#46
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Slammer and welcome to the forum! OpenFOAM 2.2.0 had a bug in the "ccm26ToFoam.C" source code file. The fix is this one: https://github.com/OpenFOAM/OpenFOAM...8af7a51d41fc4b You can edit the file and manually replace the text in red for the text in green Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

May 19, 2013, 16:01		#49
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Jack220 and welcome to the forum! OK, after you've adapted the source code, what else did you do? Did you follow the steps from post #37: http://www.cfd-online.com/Forums/ope...tml#post365682 Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

August 17, 2013, 10:04		#55
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings to all! It's somewhat simple to perform this conversion, but I would say that it is very likely to result in having a bad mesh on Fluent's side, due to the 2 step conversion process. Any way, the steps are: On the command line, first copy a tutorial case from OpenFOAM's tutorials, because you're going to need a case to act as a base structure for having the intermediate mesh. For example: Code: cp -r $FOAM_TUTORIALS/incompressible/icoFoam/cavity . cd cavity Then run the CCM converter on your CCM+ mesh: Code: ccm26ToFoam yourmesh.ccm Then export the current mesh to Fluent format: Code: foamMeshToFluent The resulting mesh file is placed automatically inside the folder "fluentInterface". But as I said, prepare yourself for complaining about the resulting bad mesh Best regards, Bruno __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

September 19, 2012, 04:19		#42
emirust Member Join Date: Sep 2012 Posts: 30 Rep Power: 13	Hey all! Will the procedure in post 27, with the file in post 29 work on OpenFoam 2.1.1 ? Thanks!

September 20, 2012, 12:18		#44
emirust Member Join Date: Sep 2012 Posts: 30 Rep Power: 13	Hey all! I followed the procedure and built it on OF 2.1.1. Works well! Thanks for the easy way wyldckat! E.

May 13, 2013, 08:23		#47
Slamer New Member Slamer Join Date: Jun 2010 Posts: 2 Rep Power: 0	Hi, I was not able to remeber where the git repo was. It helps me more than expected It compiles and 'work' on an exemple. Now, I just need to check if it does the right things. Thanks a lot.

May 19, 2013, 15:52		#48
Jack220 New Member Join Date: May 2013 Posts: 6 Rep Power: 12	Hi, I'm using the Ubuntu Deb package version 2.2.0. I already changed the ccm26ToFoam.C as mentioned above. It still doesn't work. Do I need to do something else? Thanks in advance

May 21, 2013, 13:46		#50
Jack220 New Member Join Date: May 2013 Posts: 6 Rep Power: 12	Hi Bruno, thank you for your fast answer! I went in the direction with my .ccm file and executed the command "ccm26ToFoam file.ccm". The following message appeared: "command not found". But in "/opt/openfoam220/applications/utilities/mesh/conversion/Optional/ccm26ToFoam" I can see my "ccm26ToFoam.C"-file. I can't do the steps described in post #37: First of all, I had to create the "ThirdParty-xxx" directory, because I could'nt find it. And when I execute "AllwmakeLibccmio" the following error occurs: /opt/openfoam220/ThirdParty-2.2.0/AllwmakeLibccmio: 39: .: Can't open tools/makeThirdPartyFunctions Best regards, Jack

May 22, 2013, 06:12		#52
Jack220 New Member Join Date: May 2013 Posts: 6 Rep Power: 12	Thank you very much, Bruno! That works fine!

June 6, 2013, 02:54		#53
WildSinner New Member Alexander Join Date: Feb 2013 Posts: 4 Rep Power: 13	Hey all! Can you help me? I have done all of instructions of the post #51. Instalation have installed correct. I have little experience in the use of Linux and OpenFoam. I have mesh from StarCCM+ 8.02. par example ~/Desktop/new/star_CCM.ccm I want to covert this mesh to Fluent. I understand that I have to convert this mesh to FOAM and FOAM to Fluent. Could you write commands or sequencing that need to run these? thanks in advance!

August 2, 2013, 10:21		#54
Sniper New Member Vimaldoss Jesudhas Join Date: Aug 2013 Posts: 15 Rep Power: 12	Hi Alexander, Any luck with your conversion from StarCCM to Fluent. I want to a similar thing, your inputs will be helpful

March 23, 2014, 20:32		#56
wflo New Member Join Date: Mar 2014 Posts: 3 Rep Power: 12	Once you finish the steps in the post #51. Next I tried to do the following: ccm26ToFoam yourmesh.ccm From here the terminal window gave me an error. --> FOAM FATAL IO ERROR: cannot find file file: /home/wilmer/Downloads/ccm26local220/system/controlDict at line 0. From function regIOobject::readStream() in file db/regIOobject/regIOobjectRead.C at line 73. FOAM exiting I'm new to this. Could anyone tell me if I'm following the directions right? Any steps that I'm missing here?

March 23, 2014, 22:48		#57
ziad Senior Member Join Date: Mar 2009 Location: My oyster Posts: 124 Rep Power: 17	Set up your case properly including the full hierarchy of folders and files. The error means you need to have a system/ folder with a valid controlDict file in it.

March 30, 2014, 05:23		#60
shipman Senior Member Baris (Heewa) Join Date: Jan 2013 Location: Japan Posts: 130 Rep Power: 13	Hi Bruno, Thanks so much. It is working well

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55