[Commercial meshers] checkMesh : Mesh non orthogonality

Gearb0x · April 20, 2010, 11:57

Dear Foamer,

Can someone explain me what is mesh non orthogonality ? Maybe with a picture?

Because I have this information in checkmesh and this is giving me troubles.

Thanks for your help.

jms · February 2, 2011, 10:26

Hello, did you get any answer to your question?

Gearb0x · February 2, 2011, 10:51

Dear,

I have now finished my thesis and have therefore not touched OpenFoam in a while.

From what I remember, non orthogonality is not simple mathematically speaking. It's in fact the angle difference between two adjacent cells.

In my case, I looked at this problem with my advisor because I thought I had very high non orthogonality figures. After looking at the mesh, nothing was wrong so we wondered if there was not a slight problem in the way OpenFoam is computing this value ...

Now, take my word with caution since I don't remember exactly what my problem was neither the answer I received from my advisor.

Sorry not being able to help you more.

best

April 20, 2010, 11:57	checkMesh : Mesh non orthogonality	#1
Gearb0x Senior Member Join Date: Nov 2009 Posts: 111 Rep Power: 16	Dear Foamer, Can someone explain me what is mesh non orthogonality ? Maybe with a picture? Because I have this information in checkmesh and this is giving me troubles. Thanks for your help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Technical] checkMesh states mesh is OK yet faces are bent pentagons	assert	OpenFOAM Meshing & Mesh Conversion	1	March 24, 2014 09:10
[ICEM] Improving mesh orthogonality in ICEM or Fluent	Harshal	ANSYS Meshing & Geometry	0	December 2, 2013 09:04
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 09:03
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11

February 2, 2011, 10:26		#2
jms Member José Join Date: Jan 2011 Posts: 73 Rep Power: 15	Hello, did you get any answer to your question?

February 2, 2011, 10:51		#3
Gearb0x Senior Member Join Date: Nov 2009 Posts: 111 Rep Power: 16	Dear, I have now finished my thesis and have therefore not touched OpenFoam in a while. From what I remember, non orthogonality is not simple mathematically speaking. It's in fact the angle difference between two adjacent cells. In my case, I looked at this problem with my advisor because I thought I had very high non orthogonality figures. After looking at the mesh, nothing was wrong so we wondered if there was not a slight problem in the way OpenFoam is computing this value ... Now, take my word with caution since I don't remember exactly what my problem was neither the answer I received from my advisor. Sorry not being able to help you more. best