|
[Sponsors] |
[Commercial meshers] Gambit mesh 3d and split quad |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 3, 2010, 06:10 |
Gambit mesh 3d and split quad
|
#1 |
Senior Member
Daniele
Join Date: Feb 2010
Posts: 134
Rep Power: 16 |
Hi
I try to create a mesh 3d in gambit for a 2D case in openfoam. I'll use fluenttomeshfoam utility. I create a simple 3d box and on two face i would use split quad option but gambit give me error: The matching of existing meshes on opposite ends of sweep failded Thanks Last edited by Daniele111; August 3, 2010 at 06:37. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|