conversion of fluent mesh into OF
helo ,
can anybody tell me how to convert my .mesh file in OF ? i know the command but can anybody tell me in detail ... what i have to do in fluent to make it ASCII ? |
export your mesh file .msh from Gambit (you don't have to do anything with Fluent)
Then in OF, just use the command fluentMeshToFoam or fluent3DMeshToFoam |
helo max ,
i tried to follow above said but while executing the conversion following error is coming .....Create time fileName::stripInvalid() called for invalid fileName UntitledFolder For debug level (= 2) > 1 this is considered fatal Aborted (core dumped) and i tried it with changing the mesh file name also but its not working .... |
paste exatly what command you gave, and where you executed it
|
gambitToFoam /OpenFOAM/yash-2.2.0/run/tutorials/cavity/yash.neu
this is the command i used after making new case file with the name cavity and copying 0 , constant and system file in it . also my .neu file .... |
i also tried with this command ...........
fluentMeshToFoam /OpenFOAM/yash-2.2.0/run/tutorials/cavity/yash.msh |
where are you executing this command?
use pwd command for knowing where you are >pwd |
helo max
thanks alot for your help . mesh conversion is done and at the end it also saying mesh ok . now i have one doubt in my mind that now should i need to make change in the constant /polymesh file regarding geometry or it is already done while conversion ?? |
It is already done.
|
helo ,
thanks max . |
All times are GMT -4. The time now is 11:49. |