CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [snappyHexMesh] Problem in sHM (https://www.cfd-online.com/Forums/openfoam-meshing/107341-problem-shm.html)

vinezio September 24, 2012 14:18
Problem in sHM
 
4 Attachment(s)
Hi Foamers,

I'm working on a bent tube and I've reached the 100% layer distribution but I have some problem in several parts of model. I may to use a snapEdge to refine boundary but the result is very warped. When I try to run a simulation with illegal mesh, I can't to reach the right tolerance that i want (10^5). I posted fvSchemes fvSolution files too, maybe somebody know how to do. give me a help!!

Regards,
vincenzo

vinezio October 23, 2012 10:47
nobody could help me?

vincenzo

wyldckat October 23, 2012 15:42
Greetings Vincenzo,

From your description, it's very complicated to help you without additional information.

Therefore, here are few questions:
  • Which OpenFOAM version are you using?
  • If you tried snapEdge, does that mean you're using an OpenFOAM version below 2.0.0?
  • Have you read the information and tutorials provided here: http://openfoamwiki.net/index.php/SnappyHexMesh
  • Can you provide a small example case of what you're trying to do? In other words, something conceptually similar, but a lot more simple, such as a cube or a parallelepipedic shape.
Best regards,
Bruno


All times are GMT -4. The time now is 10:41.