CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

pisoFoam turbulent case looks like laminar case

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 16, 2013, 04:31
Default pisoFoam turbulent case looks like laminar case
  #1
Member
 
Vishal
Join Date: Jul 2013
Posts: 73
Rep Power: 12
inf.vish is on a distinguished road
Hi all,

I am using pisoFoam to simulate a simple turbulent flow through a pipe. I have used 2D axisymmetric wedge to perform this simulation. The pipe dimensions are Radius = 0.1m and length = 8m. Fluid used is water. Inlet velocity is 50m/s which makes the Reynold number 10^7.

The problem is that the flow looks like a laminar flow after running the case.

Can you point out what is wrong?

Also, if i want that my pipe has surface roughness then should i use nutkroughwallfunction?
inf.vish is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
laminar and turbulent flow in two regions mozafarie FLUENT 0 March 11, 2013 14:42
Question about grids for laminar model and turbulent model Anna Tian Main CFD Forum 0 March 3, 2013 20:44
Force function for laminar case with interDyMFoam Claudio OpenFOAM Running, Solving & CFD 3 December 5, 2012 07:51
turbulent & laminar result comparison quarkz Main CFD Forum 1 November 25, 2006 06:25
Turbulent Flat Plate Validation Case Jonas Larsson Main CFD Forum 0 April 2, 2004 11:25


All times are GMT -4. The time now is 07:11.