|March 17, 2013, 16:27||
surfaceFeatureExtract fails - What's the problem?
Join Date: Mar 2009
Posts: 89Rep Power: 10
I am trying to run part 1 of the attached case:
Part 1 as I call it does the following (Allrun script):
# Make 3D mesh in slab of cells.
blockMesh > output/1-blockMesh.log 2>&1
surfaceFeatureExtract -includedAngle 150 -writeObj constant/triSurface/airfoil.stl airfoil > output/2-surfaceFeatureExtract.log 2>&1
snappyHexMesh -overwrite > output/3-snappyHexMesh.log 2>&1
rm -f 0/*
The error log says:
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create mesh for time = 0
Read mesh in = 0.14 s
Overall mesh bounding box : (-6 -0.15 -6) (16 -0.05 6)
Relative tolerance : 1e-06
Absolute matching distance : 2.50601e-05
Reading refinement surfaces.
Read refinement surfaces in = 0.03 s
Reading refinement shells.
Refinement level 2 for all cells inside refinementBox
Read refinement shells in = 0 s
Setting refinement level of surface to be consistent with shells.
Checked shell refinement in = 0 s
--> FOAM FATAL IO ERROR:
cannot find file
file: /home/tenno/OpenFOAM/tenno-2.2.0/run/airfoil/airfoil_snappyHexMesh/constant/triSurface/airfoil.eMesh at line 0.
From function regIOobject::readStream()
in file db/regIOobject/regIOobjectRead.C at line 73.
I can't find the error. What's the problem?
|March 17, 2013, 18:19||
Join Date: Dec 2011
Posts: 111Rep Power: 12
The problem is that you are using OpenFOAM 2.2, and the case you are running is made for 2.1. The way surfaceFeatureExtract is called has changed, in 2.1 all arguments were given on the command line, while in 2.2 it is given in the file system/surfaceFeatureExtractDict.
Since it is surfaceFeatureExtractDict that is generating airfoil.eMesh, snappyHexMesh fails because this file is missing. However the error lies in surfaceFeatureExtractMesh.
BTW: I see that you are running the case found here: https://www.hpc.ntnu.no/display/hpc/...l+Calculations This case should now be updated such that it works on both 2.1 and 2.2. If you download it again, it should work out-of-the-box. If not, please send me a PM.
|Thread||Thread Starter||Forum||Replies||Last Post|
|UDF compiling problem||Wouter||Fluent UDF and Scheme Programming||6||June 6, 2012 04:43|
|Gambit - meshing over airfoil wrapping (?) problem||JFDC||FLUENT||1||July 11, 2011 05:59|
|Incoherent problem table in hollow-fiber spinning||Gianni||FLUENT||0||April 5, 2008 10:33|
|Adiabatic and Rotating wall (Convection problem)||ParodDav||CFX||5||April 29, 2007 19:13|
|Is this problem well posed?||Thomas P. Abraham||Main CFD Forum||5||September 8, 1999 14:52|