CFD Online Discussion Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [snappyHexMesh] sHM, 2D, foils, sharp edge (https://www.cfd-online.com/Forums/openfoam-meshing/115282-shm-2d-foils-sharp-edge.html)

skeptik August 7, 2013 08:01
Quote:
Originally Posted by MadsR (Post 444343)
Oh I didn't realise you had your wing in a tube. That's a bit unusual :)

Mads
Really. My boss wanna see difference in Cx,Cy between 2D characteristics and numerical simulation of the real testbed.

sh.d August 11, 2013 14:04
rotate surface
 
dear Skeptik
I dont know how to use this utility?(I've used the mesh handling of Gmbyt)
can you help me please?

skeptik August 12, 2013 02:10
surfaceTransformPoints
 
Quote:
Originally Posted by sh.d (Post 444990)
dear Skeptik
I dont know how to use this utility?(I've used the mesh handling of Gmbyt)
can you help me please?
Somebody should be more persistent.

At first, OF manual told us:
"surfaceTransformPoints
Transform (scale/rotate) a surface. Like transformPoints but for surfaces"

There are few examples in the OF UM about transformPoints, so i think after that it is less complex.


At second, here is thread about concrete utility surfaceTransformPoints:
http://www.chemical-forum.com/thread-314516-1-1.html

There is another example exclusive for surfaceTransformPoints.


Good luck!

skeptik August 12, 2013 06:38
surfaceTransformPoints
 
Quote:
Originally Posted by sh.d (Post 444990)
dear Skeptik
I dont know how to use this utility?(I've used the mesh handling of Gmbyt)
can you help me please?
So i've tried

surfaceTransformPoints -scale '(1000 1000 1000)'

and it really works.
So ask Google, try "--help" before you asking people on forum


All times are GMT -4. The time now is 12:46.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page