[Other] Unable to center propeller in cylinder..

orkavic · December 14, 2013, 17:57

I was wondering if anybody had any idea as to how I can center my propeller in this cylinder. I am trying to just replace the propeller in the actual propeller case in the pimpldymfoam solver, but I just cant get it to the center.. I am attaching a screenshot.

mturcios777 · December 16, 2013, 11:48

Judging from your picture it looks like the mesh is generated by snappyHexMesh. If so have you tried using surfaceTransformPoints?

orkavic · December 16, 2013, 12:34

I am using snappyhexmesh. I figured out that I had not selected the option to avoid translating the propeller into positive space when saving as an STL in solidworks. Once I selected that option, the propeller was centered.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] BlockMesh with cylinder and halfsphere	ich558	OpenFOAM Meshing & Mesh Conversion	0	April 11, 2019 05:17
[DesignModeler] Cylinder faces problem. Unable to decompose IC Engine	izzurin	ANSYS Meshing & Geometry	0	March 19, 2017 11:19
Lift Cylinder in Liquid using ANSYS	MikeShuo	Main CFD Forum	0	October 24, 2016 01:46
motion constraints for a boat moved by propeller	simon-2	OpenFOAM Running, Solving & CFD	0	September 14, 2015 16:28
flow over a cylinder urgent!	kevin	FLUENT	8	August 11, 2015 13:00

December 16, 2013, 11:48		#2
mturcios777 Senior Member Marco A. Turcios Join Date: Mar 2009 Location: Vancouver, BC, Canada Posts: 740 Rep Power: 28	Judging from your picture it looks like the mesh is generated by snappyHexMesh. If so have you tried using surfaceTransformPoints?

December 16, 2013, 12:34		#3
orkavic New Member neek honeys Join Date: Dec 2013 Posts: 7 Rep Power: 12	I am using snappyhexmesh. I figured out that I had not selected the option to avoid translating the propeller into positive space when saving as an STL in solidworks. Once I selected that option, the propeller was centered.