CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

snappyHexMesh failed castellatedMesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 2, 2014, 07:34
Default snappyHexMesh failed castellatedMesh
Join Date: May 2013
Location: Dubai, UAE
Posts: 65
Rep Power: 6
Dadou is on a distinguished road
Dear Foamers,

First of all, I am sorry if there's already a thread that treats this topic.
I am trying to use sHM to create a simple geometry. With Salome I created .STL files but it seems that when I put them in the sHM and I run it I get this (see image attached). I used separate STL files (intake(1)*, sea) or the one under name ALL which is the merge of both sea and intake(1)

I tried with different stl but alway the same thing. you can find my sHM, blockMesh and the .stl files.

Hope you'll help me thank you


*the difference between intake and intake1 is that one of them have 1 more face shared with the sea.
Attached Files
File Type: txt blockMeshDict.txt (1.3 KB, 0 views)
File Type: txt snappyHexMeshDict.txt (12.1 KB, 2 views)
File Type: gz triSurface.tar.gz (982 Bytes, 1 views)
Dadou is offline   Reply With Quote

Old   February 10, 2014, 05:09
Join Date: Oct 2013
Posts: 36
Rep Power: 6
gelbebanane is on a distinguished road
through a brief look at your sHMD i saw these errors:
replace All.stl with your name defined under geometry -> "sea"


same as above

you dont use this stl file so uncomment this or change it to your layers.
gelbebanane is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Foam::error::printStack(Foam::Ostream&) with simpleFoam -parallel U.Golling OpenFOAM 34 May 24, 2016 12:30
Initial conditions for uniform flow andreas OpenFOAM 5 November 16, 2012 16:00
ParaView/Parafoam error when making animation Disco_Caine OpenFOAM Paraview & paraFoam 6 September 28, 2010 09:54
user subroutine error CFDUSER CFX 2 December 9, 2006 07:31
user defined function cfduser CFX 0 April 29, 2006 10:58

All times are GMT -4. The time now is 05:30.