CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

entries in refinement region were not used

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 16, 2014, 07:57
Default entries in refinement region were not used
New Member
Join Date: Feb 2014
Posts: 10
Rep Power: 5
kasto89 is on a distinguished road
hello everybody,

i'm meshing a simple cylinder connected to 2 conduct, the first in the upper and the other in the lower side of the body.

i have some problems in the castelleted step. I can not refine the cylinder and the upper conduct with the "distance" principle in refinementRegions

i tried to split the stl with surfaceSplit and give the stl file instead of the name of the region but snappy does not use the surface..

anyone have suggestion?

Thank's fabrizio
kasto89 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Weird snapping outside a refinement region jasimpson89 OpenFOAM Meshing & Mesh Conversion 0 July 29, 2012 20:46
killed "snappyHexMesh" parkh32 OpenFOAM Pre-Processing 2 April 8, 2012 17:12
snappyHexMesh aborting Tobi OpenFOAM Native Meshers: snappyHexMesh and Others 0 November 10, 2010 04:23
StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 05:38
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19

All times are GMT -4. The time now is 00:46.