CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[mesh manipulation] How to remove whole mesh region?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By klamorski

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 29, 2014, 04:14
Default How to remove whole mesh region?
  #1
New Member
 
Krzysztof Lamorski
Join Date: Jan 2012
Posts: 7
Rep Power: 14
klamorski is on a distinguished road
Hello Dear Foamers,

I have few big meshes generated by snappyHexMesh utility. Some of quality checks of this meshes failed - mostly skew faces problem. So I removed problematic cells using setSet and subsetMesh utilities.

But in some cases removing problematic cells caused detaching small cell groups from original mesh. This divided the original mesh into regions. Region 0 groups almost whole mesh's cells, other regions could be safely removed.

The question is, how to remove whole mesh region?

All the best,

Krzysztof
klamorski is offline   Reply With Quote

Old   April 2, 2014, 11:35
Default Solution found
  #2
New Member
 
Krzysztof Lamorski
Join Date: Jan 2012
Posts: 7
Rep Power: 14
klamorski is on a distinguished road
It seems that: splitMeshRegions -cellZones -largestOnly -overwrite will do the trick.
salva likes this.
klamorski is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Multi Region Mesh of a car filter Zephiro88 OpenFOAM Meshing & Mesh Conversion 3 September 11, 2019 20:34
How I can introduce my power heat (W) in chtMultiRegionFoam? aminem OpenFOAM Pre-Processing 32 August 29, 2019 03:23
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell Arman_N OpenFOAM Meshing & Mesh Conversion 1 May 20, 2019 18:16
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 07:42
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11


All times are GMT -4. The time now is 01:32.