 |
 |
 |
|
|
|
[Sponsors] | ||||
[snappyHexMesh] SnappyHexMesh warning: "Displacement ... points through the surrounding patch faces." |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 23, 2014, 09:16
|
SnappyHexMesh warning: "Displacement ... points through the surrounding patch faces."
|
#1 |
|
New Member
Chunsheng Wang
Join Date: Nov 2014
Posts: 2
Rep Power: 0  |
Hi there,
When I ran SnappyHexMesh, I had the following message: Displacement (5.8142979e-10 2.7231409e-10 1.3694218e-09) at mesh point 483739 coord (-0.044907379 -0.015238973 -0.070068371) points through the surrounding patch faces. What does it mean? |
|
|
|
|
|
December 26, 2014, 23:50
|
|
#2 |
|
New Member
Chunsheng Wang
Join Date: Nov 2014
Posts: 2
Rep Power: 0 |
Problem solved
|
|
|
|
|
|
|
December 27, 2014, 05:17
|
|
#3 |
|
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128  |
Greetings Chunsheng and welcome to posting on the forum!
We're glad that you've managed to solve your problem, but it would nice if you could share what the solution was  Best regards, Bruno |
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Decomposing meshes | Tobi | OpenFOAM Pre-Processing | 22 | February 24, 2023 09:23 |
| CFD by anderson, chp 10.... supersonic flow over flat plate | varunjain89 | Main CFD Forum | 18 | May 11, 2018 07:31 |
| [Other] Mesh Importing Problem | cuteapathy | ANSYS Meshing & Geometry | 2 | June 24, 2017 05:29 |
| [OpenFOAM.org] OF2.3.1 + OS13.2 - Trying to use the dummy Pstream library | aylalisa | OpenFOAM Installation | 23 | June 15, 2015 14:49 |
| [snappyHexMesh] SnappyHexMesh Displacement at mesh point...points through the surrounding patch faces | pizzaspinate | OpenFOAM Meshing & Mesh Conversion | 16 | March 9, 2015 13:52 |
1Likes
Linear Mode
