|
[Sponsors] |
March 9, 2016, 05:48 |
any mesh for Ahmed Body ?
|
#1 |
Member
AdOo
Join Date: Mar 2016
Location: Bordeaux
Posts: 91
Rep Power: 10 |
Hi all,
I'm new in CFD, especially in OpenFOAM. In fact I'm beginning an internship (that will last 6 months) and my tutor wants me to learn how to use OpenFOAM (basics) for next Monday, working on the Ahmed body which is a standard case. That's why I wonder if anyone would have some mesh or geometry on this subject that could helped me. Thanks, Adrien. |
|
March 13, 2016, 02:24 |
|
#2 |
Member
Join Date: Nov 2010
Posts: 62
Rep Power: 15 |
So your tutor gave you less than a week to learn the basics of OpenFoam?
Either you have a very good background in CFD or they're dreaming. The dimensions of the Ahmed body are widely available: I'd suggest modelling it, turning into an STL file and then making you mesh from their using blockmesh and snappyhexmesh as per the simplefoam motorbike tutorial. Good luck. |
|
March 14, 2016, 03:46 |
|
#3 |
Member
AdOo
Join Date: Mar 2016
Location: Bordeaux
Posts: 91
Rep Power: 10 |
Yeah that's tough... But hopefully, there's quit good tutos online.
What would you suggest me to create a geometry then a mesh before importing it on OpenFOAM ? geometry : Openscad / Blender,else ... ? mesh : Gmsh / Salome / Gambit, else ... ? (I need a free software) Thanks ! |
|
March 14, 2016, 04:51 |
|
#4 |
Member
Join Date: Nov 2010
Posts: 62
Rep Power: 15 |
To create the geometry use whatever CAD program you like providing it can save out STL files.
To mesh look at the motorbike tutorial and see how that creates the mesh from the STL and other settings. Hint the basic mesh is done by blockMesh and then its refined to the STL by snappyhexmesh. |
|
March 15, 2016, 07:57 |
|
#5 |
Senior Member
Niels Nielsen
Join Date: Mar 2009
Location: NJ - Denmark
Posts: 555
Rep Power: 27 |
__________________
Linnemann PS. I do not do personal support, so please post in the forums. |
|
August 6, 2019, 05:56 |
|
#6 |
New Member
Kshitij Singh
Join Date: Aug 2019
Posts: 1
Rep Power: 0 |
hi,
Can someone recommend me a good tutorial on ahmed body simulation on matlab. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to set periodic boundary conditions | Ganesh | FLUENT | 15 | November 18, 2020 06:09 |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
Mesh motion with Translation & Rotation | Doginal | CFX | 2 | January 12, 2014 06:21 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 14:09 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |