CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

snappy not using all refinementRegions and refinementSurfaces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 6, 2016, 06:20
Exclamation snappy not using all refinementRegions and refinementSurfaces
  #1
New Member
 
Suryansh D Kumar
Join Date: May 2016
Posts: 7
Rep Power: 3
suryansh is on a distinguished road
Hi

I am an absolute beginner to OpenFOAM. I am trying to load a geometry made of multiple STL files into snappy.

surfaceFeatureExtract has detected sharp edges and eMesh files have been generated.

But when I run snappyHexMesh, I get the following errors

+++++++++++++++++++++++++++++++++++++++++

Reading refinement surfaces.
--> FOAM Warning :
From function refinementSurfaces::refinementSurfaces(..)
in file autoHexMesh/refinementSurfaces/refinementSurfaces.C at line 226
Reading "/..../system/snappyHexMeshDict.castellatedMeshControls.refineme ntSurfaces" from line 151 to line 204
Not all entries in refinementSurfaces dictionary were used. The following entries were not used :
6
(
list of stl files/ patchnames
)

Reading refinement shells.
--> FOAM Warning :
From function shellSurfaces::shellSurfaces(..)
in file autoHexMesh/shellSurfaces/shellSurfaces.C at line 420
Reading "/../system/snappyHexMeshDict.castellatedMeshControls.refineme ntRegions" from line 218 to line 219
Not all entries in refinementRegions dictionary were used. The following entries were not used : 1
(name of stl)
Read refinement shells in = 0 s

++++++++++++++++++++++++++++++++++++++++++++

Because of this, snappy crashes

[1] --> FOAM FATAL IO ERROR:
[1] Expected a '(' while reading Tuple2, found on line 0 the doubleScalar 0
[1]
[1] file: IOstream.castellatedMeshControls.features.levels at line 0.
[1]
[1] From function Istream::readBegin(const char*)
[1] in file db/IOstreams/IOstreams/Istream.C at line 94.
[1]
FOAM parallel run exiting
[1]

The mesh generated by blockMesh is pretty huge and all STL files are well inside it.

Please help. Thanks in advance
suryansh is offline   Reply With Quote

Reply

Tags
refinement regions, refinementsurfaces, snappy hex mesh, snappyhexmeshdict

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
unsteady flow around a square cylindier snappy problems triball OpenFOAM Native Meshers: snappyHexMesh and Others 4 February 20, 2016 17:10
Very BIG problem with snappy Yuby OpenFOAM Native Meshers: snappyHexMesh and Others 1 April 30, 2015 15:53
refinementRegions ignored Jeanp OpenFOAM Native Meshers: snappyHexMesh and Others 3 June 12, 2014 05:05
snappy works but does not add layers...why? sandy13 OpenFOAM Native Meshers: snappyHexMesh and Others 32 May 30, 2013 09:11
Snappy creates strange cells far away from boundary vainilreb OpenFOAM Native Meshers: snappyHexMesh and Others 1 February 14, 2013 05:44


All times are GMT -4. The time now is 11:35.