CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

Problem with prism layers at corner edges

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 12, 2016, 11:37
Default Problem with prism layers at corner edges
  #1
Member
 
Paul Palladium
Join Date: Jan 2016
Location: FRANCE
Posts: 32
Rep Power: 3
Fauster is on a distinguished road
Dear Foamers,

I would like to know what is the wrong with my SHM's settings. I am doing a wind loading simulation (16 M Cells) and my prism layers are really bad at corner edges. You can see this on the picture attached to my message.

The prism generation crash at corner edges even if I have (I guess) a correct setting on SHM :

Quote:
// When not to extrude surface. 0 is flat surface, 90 is when two faces
// are perpendicular
featureAngle 180;

// At non-patched sides allow mesh to slip if extrusion direction makes
// angle larger than slipFeatureAngle.
slipFeatureAngle 75;
Generally "an optimum value of 180 or higher is recommended to grow layers at corner edges" according to https://www.simscale.com/docs/conten...dSettings.html

Could you help me ? What did I do wrong ?

Thanks a lot,

Regards

EDIT : 16/09/2016 :
This post could be helpful : http://www.cfd-online.com/Forums/ope...r-corners.html
It seems that featureAngle 180 is not the best setting to grow layers at corner edges. featureAngle 60 could be better...


Attached Images
File Type: jpg Yplus_and_mesh.jpg (199.8 KB, 28 views)

Last edited by Fauster; September 15, 2016 at 03:26.
Fauster is offline   Reply With Quote

Old   September 30, 2016, 00:25
Default
  #2
Senior Member
 
Join Date: Nov 2010
Location: USA
Posts: 898
Rep Power: 13
me3840 is on a distinguished road
Your edges are very jagged. Did you use surfaceFeatureExtract?
me3840 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sHM layer process keeps getting killed MBttR OpenFOAM Native Meshers: snappyHexMesh and Others 4 August 15, 2016 03:21
SHM addLayers problem: boundary layers collapsing on a patch DOFuser OpenFOAM Native Meshers: snappyHexMesh and Others 1 October 22, 2015 08:09
Prism layers and grid dependence study jcamilleri STAR-CCM+ 4 July 7, 2014 13:47
Trimmed Cell Mesher and Prism Layers Jack220 STAR-CCM+ 4 August 7, 2013 10:57
[ICEM] Creating a prism layer causes problem.. earth07 ANSYS Meshing & Geometry 1 June 3, 2013 10:28


All times are GMT -4. The time now is 18:42.