[Commercial meshers] fluent mesh conversion to foam

sangram · November 14, 2016, 06:57

Hello Everyone,

I am trying to import mesh (.msh file) from fluent to OpenFoam. When I enter command "fluentMeshToFoam", I am getting following error. I am using chtMultiRegionSimpleFaom solver. Need help..

Thanks in advance.

--> FOAM FATAL IO ERROR:
wrong token type - expected int, found on line 0 the punctuation token ')'

file: IStringStream.sourceFile at line 0.

From function operator>>(Istream&, int&)
in file primitives/ints/int/intIO.C at line 69.

FOAM exiting

sangram · November 14, 2016, 07:14

I got the solution in one of my older posts. I did not get it As I was using OpenFoam after long time.

Here is the solution:
Please follow this way: workbench Mesh: tool - option - meshing- export - ansys fluent - format of input file - ascii

November 14, 2016, 06:57	fluent mesh conversion to foam	#1
sangram New Member sangram Join Date: Jan 2014 Posts: 17 Rep Power: 12	Hello Everyone, I am trying to import mesh (.msh file) from fluent to OpenFoam. When I enter command "fluentMeshToFoam", I am getting following error. I am using chtMultiRegionSimpleFaom solver. Need help.. Thanks in advance. --> FOAM FATAL IO ERROR: wrong token type - expected int, found on line 0 the punctuation token ')' file: IStringStream.sourceFile at line 0. From function operator>>(Istream&, int&) in file primitives/ints/int/intIO.C at line 69. FOAM exiting

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD by anderson, chp 10.... supersonic flow over flat plate	varunjain89	Main CFD Forum	18	May 11, 2018 07:31
[Commercial meshers] Thin Walls Conversion from Fluent Mesh	Isaac	OpenFOAM Meshing & Mesh Conversion	1	March 4, 2016 12:08
The fluent stopped and errors with "Emergency: received SIGHUP signal"	yuyuxuan	FLUENT	0	December 3, 2013 22:56
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 06:51
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

November 14, 2016, 07:14		#2
sangram New Member sangram Join Date: Jan 2014 Posts: 17 Rep Power: 12	I got the solution in one of my older posts. I did not get it As I was using OpenFoam after long time. Here is the solution: Please follow this way: workbench Mesh: tool - option - meshing- export - ansys fluent - format of input file - ascii