[snappyHexMesh] Persistent problem with locationInMesh in for snappy

Jimmah · April 27, 2011, 03:56

Hi I've been using the forums for a while now but this is my first post.

I'm tearing my hair out trying to get my snappyHexMesh to work but I'm getting the following persistent error:

--> FOAM FATAL ERROR:
Point (4.13 4.91 9.95) is not inside the mesh or on a face or edge.
Bounding box of the mesh

-30 -5 0) (5 5 10)

From function refinementParameters::findCells(const polyMesh&) const
in file autoHexMesh/autoHexMeshDriver/refinementParameters/refinementParameters.C at line 121.

FOAM exiting

I've tried a large range of co-ordinate sets for the point without success.

The simulation is for a supersonic landspeed mockup. What is frustrating is that I used a similar setup before, but on a much smaller scale, for a bullet and had no troubles at all.

Really need some help.

Thanks.

Jimmy.

Jimmah · April 28, 2011, 00:45

Problem solved. The blockMesh was generating incorrectly.

s.m · February 21, 2013, 09:21

hi Jimmah
whould you please tell me how can you solve this error?
i have the same problem in my SHM.
thanks

Lana · April 4, 2013, 20:24

May I know whats the problem with your blockMEsh?
I have been having the same problem for my external aerodynamic model

msuaeronautics · April 5, 2013, 17:06

You all must make sure that your blockMesh domain encloses your model entirely.

April 27, 2011, 03:56	Persistent problem with locationInMesh in for snappy	#1
Jimmah New Member Join Date: Mar 2011 Posts: 2 Rep Power: 0	Hi I've been using the forums for a while now but this is my first post. I'm tearing my hair out trying to get my snappyHexMesh to work but I'm getting the following persistent error: --> FOAM FATAL ERROR: Point (4.13 4.91 9.95) is not inside the mesh or on a face or edge. Bounding box of the mesh-30 -5 0) (5 5 10) From function refinementParameters::findCells(const polyMesh&) const in file autoHexMesh/autoHexMeshDriver/refinementParameters/refinementParameters.C at line 121. FOAM exiting I've tried a large range of co-ordinate sets for the point without success. The simulation is for a supersonic landspeed mockup. What is frustrating is that I used a similar setup before, but on a much smaller scale, for a bullet and had no troubles at all. Really need some help. Thanks. Jimmy.

February 21, 2013, 09:21	error	#3
s.m Senior Member saeideh mohamadi Join Date: Aug 2012 Posts: 229 Rep Power: 14	hi Jimmah whould you please tell me how can you solve this error? i have the same problem in my SHM. thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] engineFoam new mesh problem	ayhan515	OpenFOAM Meshing & Mesh Conversion	5	August 10, 2015 08:45
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 04:43
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13

April 28, 2011, 00:45		#2
Jimmah New Member Join Date: Mar 2011 Posts: 2 Rep Power: 0	Problem solved. The blockMesh was generating incorrectly.

April 4, 2013, 20:24		#4
Lana New Member Join Date: Apr 2013 Posts: 8 Rep Power: 13	May I know whats the problem with your blockMEsh? I have been having the same problem for my external aerodynamic model

April 5, 2013, 17:06		#5
msuaeronautics Member Eric Robertson Join Date: Jul 2012 Posts: 95 Rep Power: 14	You all must make sure that your blockMesh domain encloses your model entirely.