CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [mesh manipulation] mergePatchPairs for non-conformal mesh (https://www.cfd-online.com/Forums/openfoam-meshing/135661-mergepatchpairs-non-conformal-mesh.html)

marluc May 16, 2014 05:34
mergePatchPairs for non-conformal mesh
 
1 Attachment(s)
Hallo,

I am trying to use mergePatchPairs to create a non-conformal mesh interface, but I am facing many problems.
I cannot even run it for a simple case of two adjacent blocks (with two separate, but equal faces).

I attach my blockMeshDict file.

Thanks in advance for your help.
Luca


All times are GMT -4. The time now is 12:57.