CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Mesh Utilities

mergePatchPairs for non-conformal mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 16, 2014, 05:34
Default mergePatchPairs for non-conformal mesh
Join Date: Mar 2011
Location: Italy
Posts: 47
Rep Power: 8
marluc is on a distinguished road

I am trying to use mergePatchPairs to create a non-conformal mesh interface, but I am facing many problems.
I cannot even run it for a simple case of two adjacent blocks (with two separate, but equal faces).

I attach my blockMeshDict file.

Thanks in advance for your help.
Attached Files
File Type: txt blockMeshDict.txt (2.2 KB, 8 views)
marluc is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Orthogonality/Skew issues in 3D unstructured mesh eddyy19g ANSYS Meshing & Geometry 3 February 13, 2014 10:36
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 04:24
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
conformal vs. non conformal mesh otho Main CFD Forum 2 May 30, 2008 11:11
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55

All times are GMT -4. The time now is 14:59.