CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Gmsh] GmshToFoam and dynamicFvMesh axi case

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 23, 2009, 11:58
Default GmshToFoam and dynamicFvMesh axi case
  #1
Member
 
Etienne Lorriaux
Join Date: Mar 2009
Location: Compiegne, France
Posts: 45
Rep Power: 17
elorriaux is on a distinguished road
Hello,

i've noticed a little problem with a mesh imported from gmsh.

I am using OpenFOAM-1.4.1-dev and tried to set up a dynamic mesh with a mesh imported from gmsh (gmsh-2.2.6). It's an axisymmetric case, so i revolved my mesh in gmsh to get a 5° wedge mesh.

The problem occurs when i try to update the mesh after setting up the motionU field. It crashes in the DICPrecontioner class with a null division. The checkMesh noticed some unused points in the mesh.

To be sure that the problem comes from the mesh, i've rebuild a mesh with the makeAxialMesh contrib and the mesh update worked fine.

I don't know if it still occurs with OF-1.5, i've not updated my stuff to OF-1.5-dev at the moment.

Sincerely,

Etienne.
elorriaux is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 06:06.