CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] SnappyHexMesh No change of the number of cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 12, 2009, 19:14
Default SnappyHexMesh No change of the number of cells
  #1
New Member
 
Christoph Spijker
Join Date: Mar 2009
Posts: 1
Rep Power: 0
christoph is on a distinguished road
Hallo everybody,

I have a problem; I want to solve a streaming about a car with the k epsilon model. At first I run the motorbike tutorial on icoFoam, and used the data as starting condition for the k epsilon model. This worked well.

I draw a car and wanted to do the same, blockmesh, snappyHexMesh run. But after this the icoFoam calculate only the 1000 cells of the blockMesh. The mesh has 137423 cells. I can see the mesh in paraView.

Any idea?
christoph is offline   Reply With Quote

Old   February 16, 2009, 04:12
Default did you move the mesh from tim
  #2
Senior Member
 
Wolfgang Heydlauff
Join Date: Mar 2009
Location: Germany
Posts: 136
Rep Power: 21
wolle1982 will become famous soon enough
did you move the mesh from time step 3 to the constant folder? if there is a mesh inside the constant folder before (usually the blockMesh-Mesh) of ignores the Meshes in the time step folders 1, 2 and 3.
wolle1982 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Can't Shake Erros: patch type 'patch' not constraint type 'empty' BrendaEM OpenFOAM Meshing & Mesh Conversion 12 April 3, 2022 19:32
[snappyHexMesh] snappyHexMesh can't create refimenet region clktp OpenFOAM Meshing & Mesh Conversion 3 February 27, 2022 10:26
[mesh manipulation] Mesh Refinement Luiz Eduardo Bittencourt Sampaio (Sampaio) OpenFOAM Meshing & Mesh Conversion 42 January 8, 2017 13:55
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 19:57
AMI interDyMFoam for mixer danny123 OpenFOAM Running, Solving & CFD 4 June 19, 2013 05:49


All times are GMT -4. The time now is 10:39.