|
[Sponsors] |
[snappyHexMesh] Information during SnappyHexMesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 28, 2010, 11:00 |
Information during SnappyHexMesh
|
#1 |
New Member
elisenda lopez
Join Date: Dec 2009
Posts: 14
Rep Power: 16 |
Dear OpenFOAMers,
During the SnappyHexMesh, some informations appears. For example: Shell refinement iteration 2 ---------------------------- No cells marked for refinement since reached limit 2000000. Determined cells to refine in = 8.23 s Selected for internal refinement : 1555 cells (out of 3033385) Edge intersection testing: Number of edges : 9928941 Number of edges to retest : 133749 Number of intersected edges : 692286 Refined mesh in = 36.57 s After refinement shell refinement iteration 2 : cells:3044270 faces:9928941 points:3851359 Cells per refinement level: 0 21480 1 14552 2 26210 3 77440 4 301465 5 666257 6 1936866 I have two questions about these messages: 1) what happens if the limit of cells is reached? Is there any problem? (In my case I have a limit of 2000000 in the snappyHexMeshDict). 2) what does it means "out of 3033385" Is there any OpenFOAMer that knows these questions? Thanks in advance, Elisenda |
|
May 6, 2010, 03:50 |
|
#2 | |
Senior Member
Niels Nielsen
Join Date: Mar 2009
Location: NJ - Denmark
Posts: 555
Rep Power: 27 |
Hi nothing happens if the cell limit is reached it will just stop refining. So if you need further refinement you need to up the cell count.
Quote:
__________________
Linnemann PS. I do not do personal support, so please post in the forums. |
||
May 12, 2010, 07:46 |
|
#3 |
New Member
elisenda lopez
Join Date: Dec 2009
Posts: 14
Rep Power: 16 |
Thanks a lot Linnemann.
Elisenda |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[CAD formats] Creating waterproof STL using snappyHexMesh or salome | Tobi | OpenFOAM Meshing & Mesh Conversion | 58 | May 13, 2020 06:01 |
Store "hidden" information in CFX mesh file | mmoelle1 | CFX | 7 | June 7, 2018 19:04 |
[snappyHexMesh] Parallelize snappyHexMesh optimally? | Antimony | OpenFOAM Meshing & Mesh Conversion | 1 | May 25, 2016 00:01 |
[snappyHexMesh] snappyHexMesh runs endless - I need general advise | TeresaT | OpenFOAM Meshing & Mesh Conversion | 5 | November 17, 2015 02:50 |
[snappyHexMesh] snappyHexMesh Tutorials, further information | gelbebanane | OpenFOAM Meshing & Mesh Conversion | 1 | October 22, 2013 09:16 |