[mesh manipulation] SplitMeshRegion

ivan_cozza · October 28, 2008, 16:03

Hi Foamers,
has someone ever tryied to use the splitMeshRegion utility? What does it do?
I'm looking for something that divide my domain in several zones, but I need to avoid internal boundaries, so I want to run from a mesh to the other without crossing patches. Something like a parallel run with domain decomposition (generating processor type patches). Is splitMeshRegion what I need?
Thanks, Ivan

mattijs · October 29, 2008, 04:08

Regions are subdivisions of meshes. See the chtMultiRegionFoam tutorial in 1.5.x.

If this is not what you want you can run decomposePar to generate processor patches. Use the manual option which reads (as far as I remember) a labelList from the constant directory with for every cell the processor it should be in.

ivan_cozza · October 29, 2008, 06:38

Thank you Mr Janssens,
I had a look in chtMultiRegionFoam, and my question is: a cell in region 1 that lays just near the region 2 knows what's its neighbour cell in the other region?

October 28, 2008, 16:03	SplitMeshRegion	#1
ivan_cozza Senior Member Ivan Flaminio Cozza Join Date: Mar 2009 Location: Torino, Piemonte, Italia Posts: 210 Rep Power: 18	Hi Foamers, has someone ever tryied to use the splitMeshRegion utility? What does it do? I'm looking for something that divide my domain in several zones, but I need to avoid internal boundaries, so I want to run from a mesh to the other without crossing patches. Something like a parallel run with domain decomposition (generating processor type patches). Is splitMeshRegion what I need? Thanks, Ivan

October 29, 2008, 04:08	Regions are subdivisions of me	#2
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	Regions are subdivisions of meshes. See the chtMultiRegionFoam tutorial in 1.5.x. If this is not what you want you can run decomposePar to generate processor patches. Use the manual option which reads (as far as I remember) a labelList from the constant directory with for every cell the processor it should be in.

October 29, 2008, 06:38	Thank you Mr Janssens, I had	#3
ivan_cozza Senior Member Ivan Flaminio Cozza Join Date: Mar 2009 Location: Torino, Piemonte, Italia Posts: 210 Rep Power: 18	Thank you Mr Janssens, I had a look in chtMultiRegionFoam, and my question is: a cell in region 1 that lays just near the region 2 knows what's its neighbour cell in the other region?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[mesh manipulation] splitMeshRegion	FekrKon	OpenFOAM Meshing & Mesh Conversion	27	June 23, 2020 13:57
[Other] splitMeshRegion problem(cell in multi zones)	huangkai	OpenFOAM Meshing & Mesh Conversion	0	April 10, 2019 10:52
[mesh manipulation] splitMeshRegion for chtMultiRegionFoamCase	Bob!	OpenFOAM Meshing & Mesh Conversion	0	February 27, 2017 18:08
cht splitMeshRegion but keeping porous cellZones	klilla	OpenFOAM Pre-Processing	3	November 19, 2013 08:32
[mesh manipulation] splitMeshRegion	Khelian973	OpenFOAM Meshing & Mesh Conversion	1	July 2, 2009 05:02