[mesh manipulation] Problem when defining a mesh

gaottino · July 5, 2006, 09:59

Hi,
I have this problem. Let consider a single edge, for example a linear horizontal edge: I have to obtain a grid which is finer at the start and at the end of the edge, and coarser in the middle. So, I don't know if there is a command that allows us to do it or if there
is another method to do it.
Somebody can help me, please?

Best regards,

Gabriele

mattijs · July 5, 2006, 14:42

You'll need to use two blocks, each having opposite grading. See e.g. the pitzDaily tutorial

July 5, 2006, 09:59	Problem when defining a mesh	#1
gaottino New Member Gabriele Ottino Join Date: Mar 2009 Location: Turin, Piemonte, Italy Posts: 5 Rep Power: 17	Hi, I have this problem. Let consider a single edge, for example a linear horizontal edge: I have to obtain a grid which is finer at the start and at the end of the edge, and coarser in the middle. So, I don't know if there is a command that allows us to do it or if there is another method to do it. Somebody can help me, please? Best regards, Gabriele

July 5, 2006, 14:42	You'll need to use two blocks,	#2
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	You'll need to use two blocks, each having opposite grading. See e.g. the pitzDaily tutorial

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell	Arman_N	OpenFOAM Meshing & Mesh Conversion	1	May 20, 2019 17:16
[Other] Mesh Importing Problem	cuteapathy	ANSYS Meshing & Geometry	2	June 24, 2017 05:29
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 18:57
Mesh is doing some problem	prwl120	FLUENT	2	May 21, 2015 14:05