CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Other] is free meshing or mapped meshing is best for flow problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 18, 2010, 12:56
Default is free meshing or mapped meshing is best for flow problems
  #1
New Member
 
shanu
Join Date: Feb 2010
Posts: 3
Rep Power: 16
shanu is on a distinguished road
Hello,

I am trying in flow problems in a rectangular channel where incompressible navier stokes and conduction convection systems I am including.

I am in a confusion to choose mapped or free meshing in future. I did both in the same system but ending with huge different results.

I heard that mapped mesh is preferred than free mesh in any field, is it true?

also in free meshing triangular, tetrahedral and for mapped mesh rectangular, hexagonal meshes are obtaining. which pair is best suited for flow condition and heat transfer equations.

I have validate it with experimental results at the end in order to get good results suggest which type of meshes to prefer.

for me mapped meshes are comfortable than free meshes. because it is orderly arranged and easy for me to do post processing.

Also in free meshing oscillations are created in solutions and not in the case of mapped mesh.

My department colleagues are preffereing free mesh and avoiding mapped mesh because it gives wrong results, is it true?


thanks for you precious help in advance,

Regards
V Shanmugam
shanu is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Vertex numbering is dense KateEisenhower OpenFOAM Meshing & Mesh Conversion 7 August 3, 2015 11:49
[Workbench] mapped face meshing taw ANSYS Meshing & Geometry 1 February 28, 2013 11:44
[ANSYS Meshing] No mapped quadrilateral meshing in V13? chris85 ANSYS Meshing & Geometry 0 June 20, 2012 05:13
[ICEM] Flow channel meshing problems StefanG ANSYS Meshing & Geometry 19 May 15, 2012 07:44
[ICEM] Need help in ICEM CFD Mapped Meshing falconf16 ANSYS Meshing & Geometry 3 February 19, 2010 15:21


All times are GMT -4. The time now is 13:06.