|
[Sponsors] |
[Commercial meshers] having problems with fluent3DMeshToFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 7, 2010, 07:29 |
having problems with fluent3DMeshToFoam
|
#1 |
New Member
Join Date: Jan 2010
Posts: 10
Rep Power: 16 |
Hello all,
I have a *.msh file I would like to convert to OpenFOAM format. My *.msh file contains hanging nodes, however I found one post on this forum which indicated fluent3DMeshToFoam could handle this. My intent is to use zipUpMesh utility after the conversion to remove the hanging nodes. Running the converter gives the following error: /*---------------------------------------------------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: 1.6.x | | \\ / A nd | Web: www.OpenFOAM.org | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ Build : 1.6.x-605bfc578b21 Exec : fluent3DMeshToFoam gaussian.msh Date : May 07 2010 Time : 13:03:32 Host : dkrdscfdst01 PID : 5137 Case : /cfd/grsox/openFoam/level1/gibraltar nProcs : 1 SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE). // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Dimension of grid: 3 Number of points: 1740936 PointGroup: 1 start: 0 end: 1740935. Reading points... --> FOAM FATAL ERROR: index 1740936 out of range 0 ... 1740935 From function UList<T>::checkIndex(const label) in file /home/grsox/OpenFOAM/OpenFOAM-1.6.x/src/OpenFOAM/lnInclude/UListI.H at line 110. FOAM aborting #0 Foam::error:rintStack(Foam::Ostream&) in "/home/grsox/OpenFOAM/OpenFOAM-1.6.x/lib/linux64GccDPOpt/libOpenFOAM.so" #1 Foam::error::abort() in "/home/grsox/OpenFOAM/OpenFOAM-1.6.x/lib/linux64GccDPOpt/libOpenFOAM.so" #2 Foam::Ostream& Foam:perator<< <Foam::error>(Foam::Ostream&, Foam::errorManip<Foam::error>) at ~/OpenFOAM/OpenFOAM-1.6.x/src/OpenFOAM/lnInclude/errorManip.H:87 #3 Foam::UList<Foam::Vector<double> >::checkIndex(int) const at ~/OpenFOAM/OpenFOAM-1.6.x/src/OpenFOAM/lnInclude/UListI.H:114 #4 Foam::UList<Foam::Vector<double> >:perator[](int) at ~/OpenFOAM/OpenFOAM-1.6.x/src/OpenFOAM/lnInclude/UListI.H:141 #5 yyFlexLexer::yylex() at ~/OpenFOAM/OpenFOAM-1.6.x/applications/utilities/mesh/conversion/fluent3DMeshToFoam/fluent3DMeshToFoam.L:372 #6 main at ~/OpenFOAM/OpenFOAM-1.6.x/applications/utilities/mesh/conversion/fluent3DMeshToFoam/fluent3DMeshToFoam.L:816 #7 __libc_start_main in "/lib64/libc.so.6" #8 __gxx_personality_v0 in "/home/grsox/OpenFOAM/OpenFOAM-1.6.x/applications/bin/linux64GccDPOpt/fluent3DMeshToFoam" Aborted Is it true that fluent3DMeshToFoam can take hanging nodes or is my approach of this utility + zipUpMesh rubbish? Thanks in advance, Steve |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Problems with coedge curves and surfaces | tommymoose | ANSYS Meshing & Geometry | 6 | December 1, 2020 11:12 |
[mesh manipulation] Problems with rotational cyclic boundaries | TReviol | OpenFOAM Meshing & Mesh Conversion | 8 | July 11, 2014 03:45 |
Needed Benchmark Problems for FSI | Mechstud | Main CFD Forum | 4 | July 26, 2011 12:13 |
Two-phase air water flow problems by activating Wall Lubrication Force | challenger85 | CFX | 5 | November 5, 2009 05:44 |
Help required to solve Hydraulic related problems | aero | CFX | 0 | October 30, 2006 11:00 |