CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM Mesh Utilities (
-   -   gmshFoam utility (

zubair.maalick December 8, 2010 04:44

gmshFoam utility
I am using OpenFoam-1.6 and need to use gmshFoam utility to convert gmsh geometry to openFoam.

to Install gmshFoam I have followed following link:

The problem I am getting is:
after ./Allwmake command I have received following error:


&, const Foam::Xfer<Foam::List<int> >&, bool)
/home/openfoam/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude/polyMesh.H:219: note: Foam::polyMesh::polyMesh(const Foam::IOobject&)
/home/openfoam/OpenFOAM/OpenFOAM-1.6/src/OpenFOAM/lnInclude/polyMesh.H:166: note: Foam::polyMesh::polyMesh(const Foam::polyMesh&)
polyMeshConversion/polyMeshConversion.C: In member function ‘Foam::polyMeshConversion* Foam::polyMeshConversion::renumberedMesh(Foam::lab el) const’:
polyMeshConversion/polyMeshConversion.C:231: error: ‘allFaces’ was not declared in this scope
polyMeshConversion/polyMeshConversion.C:264: error: ‘allPoints’ was not declared in this scope
make: *** [Make/linuxGccDPOpt/polyMeshConversion.o] Error 1

All times are GMT -4. The time now is 04:04.