 |
 |
 |
|
|
|
[Sponsors] | ||||
April 12, 2018, 06:36
|
Unable to transfer mesh
|
#1 |
|
New Member
Gebin Edwin George
Join Date: Oct 2016
Posts: 3
Rep Power: 9  |
Screenshot from 2018-04-12 16:01:49.png
I created a 3D geometry in Workbench and after meshing i tried converting it to OpenFoam, and Iam not able to. the following message comes. If someone could help me please. |
|
|
|
|
|
April 24, 2018, 01:36
|
|
#2 |
|
Senior Member
Join Date: Aug 2013
Posts: 407
Rep Power: 15 |
Hi,
One possible cause for the issue is the name of your folder. It seems to be "sample work" with a space in between. From what I have seen, the error that you have gotten is most commonly associated with having a space in the folder name. Change it to say, "sample_work" and see if it helps. Cheers, Antimony |
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] Add Mesh Layers doesnt work on the whole surface | Kryo | OpenFOAM Meshing & Mesh Conversion | 13 | February 17, 2022 07:34 |
| Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
| Two-sided Wall Heat Transfer BC - No Separate Solid Mesh and No Heat Transfer Coeff | swahono | OpenFOAM Running, Solving & CFD | 10 | October 15, 2018 05:43 |
| Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |
| [snappyHexMesh] Layers:problem with curvature | giulio.topazio | OpenFOAM Meshing & Mesh Conversion | 10 | August 22, 2012 09:03 |
Linear Mode
