About snappyHexMesh
A page dedicated to describing how to use snappyHexMesh has been finally created at openfoamwiki.net: http://openfoamwiki.net/index.php/SnappyHexMesh
Feel free to contribute to that page. I only gave it a stern kick off, but a lot more can be added to that page! I've stickyfied this thread, to make easier for people to find it. Here can be discussed how to add content to the wiki page and about this thread; but on this specific "About snappyHexMesh" thread will not be answered questions on how to use snappyHexMesh! ;) |
Hey bruno,
I created some sHM tutorials too. Is it possible to link it? |
Hi Tobi,
Like I wrote above: Quote:
Bruno |
Quote:
i updated the wikipage but the changes will not be accepted after save it? What do I wrong? |
Hi Tobi,
Didn't you notice the question on the top after your first save? It asks what OpenFOAM field name file corresponds to the field it asks. It's a captcha question. Best regards, Bruno |
No not really but now I see it :)
Thanks Tobi |
Quote:
|
Quote:
I am new to the wiki and dont see that chapta code at the beginning. But if you know it, its not a problem. Its okay couse I know that spam too. Its a good way to filter it. Good day Tobi |
Quote:
|
Hi,
here are my old Cases: http://holzmann-cfd.de/index.php/en/openfoamen/ I am working on some new cases! Tobi |
Hi
Thank you Tobi for your help :) I think they will be useful for a beginner like me ;) |
Hi all,
please notice that all snappyHexMesh tutorials are now avaiable on my new homepage. http://www.holzmann-cfd.de/index.php/tutorials I updated the wiki, too. Thanks, fun Tobi |
Quote:
|
Hi,
thanks for the hint. The links was wrong (not tutorials --> turorial) :) http://www.holzmann-cfd.de/index.php/tutorial |
Hi All,
I made a dynamic mesh fan and want to share it with you. After I set up my new server I will upload and clean that case :) |
Hi Tobi,
None of your links are working :-| |
Tutorial by Jens H. at personal blog: snappyHexMesh Tutorial (part 1)
link not working |
Quote:
|
STL files
Hello everyone
I want to open a STL file in OpenFoam and proceed with, however, it does not show anything. I'm a but confused how can I do this in snappyHexmesh. Regards |
Meshing of porous cylinder using snappyHexMesh
1 Attachment(s)
Problem statement: Meshing to simulate Flow past porous cylinder using snappyHexMesh utility.
Questions and doubts: How to mesh both porous cylinder (internal + external) as well as surrounding together? I am able to mesh it either inside porous cylinder (mesh from surrounding got removed) or surrounding (mesh inside cylinder got removed) but I am not getting how to get both at the same time. |
All times are GMT -4. The time now is 11:39. |