[blockMesh] Uniform prism cells with blockMesh

keepfit · September 19, 2012, 10:49

Hello, OpenFoamers,

I was wondering, is it possible to generate a uniform prism (see the 2nd figure)?

Please take a look at the attached files.

First prism is created by blockmesh, in which the cells are obvious skew, and have large aspect ratio on top; especially when the number of cells is increasing.
Second prism with uniform cells is what i want.

Regards,
Daivd

wyldckat · April 5, 2014, 18:59

For future reference, this topic has been discussed here: http://www.cfd-online.com/Forums/ope...tml#post483293 - post #4 and onwards.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boundary Conditions	MtnRunBeachBum	OpenFOAM Pre-Processing	1	April 30, 2015 16:33
Strange high velocity in centrifugal pump simulation	huangxianbei	OpenFOAM Running, Solving & CFD	26	August 15, 2014 02:27
singularity?	mihaipruna	OpenFOAM Running, Solving & CFD	5	April 24, 2012 17:18
[snappyHexMesh] snappyHexMesh aborting	Tobi	OpenFOAM Meshing & Mesh Conversion	0	November 10, 2010 03:23
physical boundary error!!	kris	Siemens	2	August 3, 2005 00:32

April 5, 2014, 18:59		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	For future reference, this topic has been discussed here: http://www.cfd-online.com/Forums/ope...tml#post483293 - post #4 and onwards.