CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Other] [Gridgen] boundary condition for single point

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 15, 2012, 11:56
Question [Gridgen] boundary condition for single point
  #1
New Member
 
Yidong
Join Date: Nov 2011
Posts: 23
Rep Power: 11
yidongxia is on a distinguished road
I am a rookie user of Gridgen. Can I prescribe boundary condition to a single point on the boundary face, particularly, a corner point? So far I can see that the "set BCs" option is only available for boundary faces. Since I am working on the standard finite element method for CFD, I do need to treat some special boundary points individually. Thanks so much if you can shed some light on me!
yidongxia is offline   Reply With Quote

Old   November 20, 2012, 10:49
Default
  #2
Senior Member
 
Chris Sideroff
Join Date: Mar 2009
Location: Ottawa, ON, CAN
Posts: 417
Rep Power: 18
cnsidero is on a distinguished road
Quote:
Originally Posted by yidongxia View Post
I am a rookie user of Gridgen. Can I prescribe boundary condition to a single point on the boundary face, particularly, a corner point? So far I can see that the "set BCs" option is only available for boundary faces. Since I am working on the standard finite element method for CFD, I do need to treat some special boundary points individually. Thanks so much if you can shed some light on me!
yidongxia

Currently there is no method to specify a BC at a point, possibly needed for FEA simulations where point loads or moments need to be applied.

Pointwise, the successor to Gridgen, has a CAE export API whereby you can develop a custom library to export your mesh and BCs to whatever format you desire. It's possible that point-based BCs could possibly done within a custom export plugin.

-Chris
cnsidero is offline   Reply With Quote

Old   November 20, 2012, 11:51
Default
  #3
New Member
 
Yidong
Join Date: Nov 2011
Posts: 23
Rep Power: 11
yidongxia is on a distinguished road
Quote:
Originally Posted by cnsidero View Post
yidongxia

Currently there is no method to specify a BC at a point, possibly needed for FEA simulations where point loads or moments need to be applied.

Pointwise, the successor to Gridgen, has a CAE export API whereby you can develop a custom library to export your mesh and BCs to whatever format you desire. It's possible that point-based BCs could possibly done within a custom export plugin.

-Chris
Thanks a lot for your reply.
yidongxia is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cyclic boundary condition in foam-extend 4.0 rellumeister OpenFOAM Pre-Processing 2 March 3, 2020 09:03
CFD analaysis of Pelton turbine amodpanthee CFX 31 April 19, 2018 19:02
Centrifugal fan-reverse flow in outlet lesds to a mass in flow field xiexing CFX 3 March 29, 2017 11:00
[snappyHexMesh] snappyHexMesh and cyclic boundaries Ruli OpenFOAM Meshing & Mesh Conversion 2 December 9, 2013 07:51
vorticity boundary condition bearcharge Main CFD Forum 0 May 14, 2010 12:32


All times are GMT -4. The time now is 16:38.