|
[Sponsors] |
[Other] OF 1.6-ext Number of edges not aligned with or perpendicular to non-empty directions |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 21, 2012, 04:26 |
OF 1.6-ext Number of edges not aligned with or perpendicular to non-empty directions
|
#1 |
New Member
Join Date: Dec 2012
Posts: 1
Rep Power: 0 |
hey guys,
i'm trying to simulate a piloted jetflame with OpenFOAM. First I used OpenFOAM version 1.7.1 and there i've got no errors after checkMesh. But for a correct chemistry-model-function i have to use the version 1.6-ext. With this version i get with the same mesh the checkMesh error "Number of edges not aligned with or perpendicular to non-empty directions: 10904" Additionally checkMesh shows a wrong aspect ratio: in version 1.7.1 it is something about 66 and in version 1.6-ext something about 500 in the mesh with least cells. sorry for my bad english, its not my native language. I hope anyone can help me. Thank you! My operating system is Ubuntu 12.04 64bit |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh does not create any mesh except one for the reference cell | Arman_N | OpenFOAM Meshing & Mesh Conversion | 1 | May 20, 2019 18:16 |
[mesh manipulation] Mesh Refinement | Luiz Eduardo Bittencourt Sampaio (Sampaio) | OpenFOAM Meshing & Mesh Conversion | 42 | January 8, 2017 13:55 |
DecomposePar unequal number of shared faces | maka | OpenFOAM Pre-Processing | 6 | August 12, 2010 10:01 |
[blockMesh] BlockMeshmergePatchPairs | hjasak | OpenFOAM Meshing & Mesh Conversion | 11 | August 15, 2008 08:36 |
Unaligned accesses on IA64 | andre | OpenFOAM | 5 | June 23, 2008 11:37 |